The Glow Plug Relay is situated on the Battery case housing.
Take off the battery cover, look over the back edge towards the bulk head,and you will see it attached to the lower edge of the battery casing.
right next to the batter, should be attached at the back end of it
under neath the fuse bank of the underbonnet fuse box!
To change the glow plugs on a Peugeot 206, first, ensure the engine is cool and disconnect the battery. Remove the engine cover if applicable, then carefully detach the electrical connectors from each glow plug. Use a suitable socket wrench to unscrew the old glow plugs, taking care not to damage the threads in the cylinder head. Install the new glow plugs, ensuring they are tightened to the manufacturer's specifications, reconnect the electrical connectors, and finally, reconnect the battery.
normally glow plugs are used on an IDi[ Indirect Injection] diesel engine. most peugeot 206 vehicles have an HDi engine[ Peugeot's nomenclature for Commonrail Direct injection]. hence there will be no glow plugs in those 206 vehicles. Some of the base model 206 from the first few years shipped with the non-HDi DW8 engine - which do have glow plugs. Check which model you have. If it's 1.9, then its the DW8. Else it is probably an HDi. Replace quickly if they start to fail.
0.9mm
I would suggest that as you are asking this question, you have a cigarette lighter-less 206 or have seen a few around. The simple answer is no, not all 206's have cigarette lighters. They do have a plug behing the blanking plate that a peugeot cigarette lighter will plug into, or you can easily (and cheaply) fit a universal aftermarket one with a hole saw and some crimp connectors. Some are also supplied with the socket but not the actual insertable plug (the bit that gets hot) in which case you can get one from most reputable breakers yards.
To change the relay on a Peugeot 206, first, locate the relay box, which is typically found under the dashboard or in the engine compartment. Identify the specific relay you need to replace by consulting the vehicle's manual for the correct position. Carefully pull the faulty relay out of its socket and insert the new relay, ensuring it is securely in place. Finally, test the new relay to ensure it functions properly.
under the ecu
When do change cam belt on peugeot 206 180 gti
0.9mm
size 20
1.0 mm