0
What else can I help you with?
What are the cylinder head torque settings for a fiat uno 1100?
30nm 90degrees and then another 90degrees
What are the cylinder head torque settings for a fiat 1.3 multijet?
20nm 40nm 90degrees 90degrees
What are the cylinder head torque settings for a fiat punto 1.1 55?
Fiat do not issue torque settings for a punto they use angles so that you can snap your stretch bolts! after contacting fiat and haynes neither of them would give proper torque settings, so i delved into my many tech manuals on fiat fire engines which is what is in your punto and i have successfully changed many fiat punto head gaskets using the following torque settings: stage 1 starting from the centre head bolts tighten to 33nm: stage 2:65nm and finally stage 3: 96nm these torque settings work fine and will probably save you buying new head bolts.
What are the cylinder head torque settings for a fiat punto 55s?
Fiat do not issue torque settings for a punto they use angles so that you can snap your stretch bolts! after contacting fiat and haynes neither of them would give proper torque settings, so i delved into my many tech manuals on fiat fire engines which is what is in your punto and i have successfully changed many fiat punto head gaskets using the following torque settings: stage 1 starting from the centre head bolts tighten to 33nm: stage 2:65nm and finally stage 3: 96nm these torque settings work fine and will probably save you buying new head bolts.
Torque settings for your fiat 80 90 tractor?
The torque settings for a Fiat 80-90 tractor can vary depending on the specific component being tightened. Generally, for the cylinder head bolts, a common torque specification is around 50-55 Nm (Newton-meters). Always refer to the manufacturer's service manual for the precise torque specifications for various components, as using the correct settings is crucial for optimal performance and to prevent damage.
Flat punto 96 1200cc touqe settings for cylinder head bolts?
The torque settings for a 96 Fiat Punto 12cc for cylinder head bolts are 30 NM at 90 degrees. Then an additional 90 degrees.?æ?æ
What are the cylinder head torque settings for a fiat brava 1.2 80?
The torque settings for the cylinder head on a Fiat Brava 1.2 80 typically require the bolts to be tightened in stages. Generally, the initial torque should be set at around 25 Nm, followed by a second stage of 60 Nm, and finally, an additional 90 degrees turn. Always refer to the specific service manual for your vehicle for the most accurate and detailed instructions.
What are the rocker cover torque settings of a fiat punto?
8-10Nm
What are the cylinder head torque settings for fiat uno 1100 fire?
The cylinder head torque settings for the Fiat Uno 1100 Fire engine typically are around 20 Nm (15 lb-ft) for the initial stage, followed by a final torque of about 70 Nm (51 lb-ft) in a specific sequence to ensure even pressure distribution. It's essential to consult the vehicle's service manual for the exact specifications and sequence, as variations can occur based on manufacturing changes. Always use a calibrated torque wrench for accurate settings.
What is the Cylinder head torque settings for fiat Cinquecento 903cc?
for cinquecento ,127, fiorino,merbella, ibiza 903 cc panda 45 uno its (1) 30nm (2) 90deg (3) 90deg for cinquecento ,127, fiorino,merbella, ibiza 903 cc panda 45 uno its (1) 30nm (2) 90deg (3) 90deg
What is the Fiat bravo 1.4 cylinder head torque settings?
The torque settings for the Fiat Bravo 1.4 cylinder head typically range from 20 to 25 Nm for initial tightening, followed by a further angle of 90 degrees for the final torque. It's essential to follow the manufacturer's specifications for the exact model and year, as these can vary. Always ensure the cylinder head bolts are tightened in the correct sequence to avoid warping the head. For precise details, consult the vehicle's service manual or a repair guide.
Torque wrench setting for front hub nut on 04 fiat panda?
The front hub nut on a 2004 Fiat Panda typically requires a torque setting of around 200 Nm (147 lb-ft). It's important to use a torque wrench to ensure the correct specification is met for proper wheel assembly and safety. Always consult the vehicle’s service manual for the most accurate and specific torque settings. Additionally, it's advisable to recheck the torque after a short period of driving.
