Mercedes Benz coolant.go to the dealer or order it on line. the 164 ml requires this.
Mercedes recommends that each of their vehicles use a certain synthetic oil. The ML350 is recommended to use 5w 30 synthetic oil only.
When engine is cold, turn it counter-clockwise. You can use channel locks if you can't turn it by hand. ENSURE ENGINE IS NOT HOT!!!
For a Mercedes ML350, the cooling system capacity is typically around 9 to 10 quarts (approximately 8.5 to 9.5 liters) depending on the model year. When adding antifreeze, it's important to use a compatible coolant, such as MB 325.0 or MB 325.3 approved antifreeze. Always check the owner's manual for the specific capacity and recommendations for your particular model year.
What kind power steering fluid do i use for a Ml 350 2003
Just use the factory mercdes Benz coolant, it comes in a white container. I don't belive that any other coolants are recommended for your car.
For a 2003 Mercedes ML350, it's recommended to use synthetic motor oil with a viscosity of 5W-30. Mercedes-Benz typically specifies oils that meet their MB 229.5 or MB 229.3 standards. Always check the owner's manual for specific recommendations and intervals for oil changes to ensure optimal engine performance.
To remove the caliper on a 2006 Mercedes-Benz ML350, you typically need a 7mm or 13mm socket, depending on whether you are removing the caliper bracket or the caliper itself. It's important to check the specific configuration of your vehicle, as sometimes the size may vary slightly based on brake components. Always ensure to use the appropriate tools and follow safety protocols when working on brake systems.
You can use any type of SAE certified coolant in your 2003 Mercedes-Benz. The coolant should have a temperature range of -25 degrees Fahrenheit to 120 degrees Fahrenheit.
A 2009 M-Class Mercedes has hard-drive based navigation and does not require a disc at all. The specific years and models each navigation disc is compatible with is labeled on the disc.
A 1992 Mercedes 180E typically uses a high-quality, ethylene glycol-based coolant. It's recommended to use a coolant that meets Mercedes-Benz specifications, such as MB 325.0 or MB 325.3. Always ensure the coolant is mixed with distilled water at the appropriate ratio, usually 50:50, for optimal performance and protection against corrosion.
A 2005 Mercedes ML350 typically requires synthetic motor oil with a viscosity rating of 5W-30 or 0W-40, meeting the Mercedes-Benz specifications of MB 229.5 or MB 229.3. It’s essential to use high-quality oil that complies with these standards to ensure optimal engine performance and longevity. Always check the owner’s manual for specific recommendations and oil change intervals.
The reservoir for the power steering for this SUV is located in front of the engine, driver side. To access it, simply remove the plastic air tunnel (driver side); You will find it easily. Please note that as per an adviser from my local Mercedes dealer, we should put the Mercedes power steering fluid, but for an adjustment of the level, we can use any generic brand of power steering fluid.