answersLogoWhite

0

For a Peugeot 307, it is recommended to use a coolant fluid that meets the specifications of the Peugeot-approved antifreeze, typically a mixture of ethylene glycol and water. Look for a coolant that is specifically labeled for use in Peugeot vehicles, often referred to as "Long Life" or "Organic Acid Technology" (OAT) coolant. It's essential to follow the manufacturer's guidelines regarding the correct mixture ratio and to avoid mixing different types of coolant to prevent potential damage. Always check the owner’s manual for specific recommendations.

User Avatar

AnswerBot

2w ago

What else can I help you with?

Related Questions

What coolant do you put into a PEUGEOT 307 sw?

Antifreeze G12+, G12 or G11


Where do you put engine coolant in a peugeot hdi 307 model 2004?

how do u change the timing belt in my 307


How much antifreeze do you put in your peugeot 307 hdi 90?

I don't have the manual right now, but I'm pretty sure you need 10.5 liters of coolant for the 2.0 HDI engine.


Where is the steering fluid on a Peugeot 306?

What power steering fluid do I put in peugeot 306sw 05 reg


What coolant do I put in my Peugeot 307 diesel?

Check the colour the coolant does in your car at the moment. It will be either Blue or red.With that information , go to your nearest garage and ask for "red or Blue " engine coolant. Or you could wash out your coolant system, then refill with water and antifreeze mix usually at a ratio of 35-50 %. Hope this Help.Dominick


Where do you put brake fluid in a peugeot 306?

in the brake fluid bottle. >:D


What if you put coolant in brake fluid tank?

THe fluid will need flushed and changed.


Fluids you put in the car?

Oil, Antifreeze, Power steering fluid, brake fluid, transmission fluid, coolant...


Where to put water in a Peugeot 207?

In a Peugeot 207, water should be added to the windshield washer reservoir, which is typically located at the front of the engine bay. Look for a plastic tank with a cap that often has a windshield icon on it. Make sure to use clean water or a suitable windshield washer fluid to ensure optimal performance. Avoid adding water to the coolant reservoir, which is intended for coolant only.


How do you reset immobilizer on peugeot 307 hdi?

If you are having an issue with the immobilizer on a Peugeot 307 HDI, you need to recode your key. To do this put the key into the ignition and turn to the on position, hold the Lock button on the key for 10 seconds, take the key out of the ignition, and then test to see if the car starts after another 10 seconds.


Can you put to much fluid in the coolant resivor?

Yes , when the engine is cold the coolant should be up to the cold fill mark


What happens when you put transmission fluid in the coolant reservoir?

You are then qualified to work at Jiffy-Lube. Tranny fluid in the fluid resivoir is not a huge deal if it is a small amount. If you put in more, just drain the coolant and refill with fresh according to you manufacturer. Transmission fluid has different properties than coolant. It needs to conduct heat, lubricate the water pump and not vaproize at the engine temperatures.