steering sensor needs resetting with ignition on turn steering wheel then start up if it continues see dealer its a software fault eventually it will not let u drive.
The steering wheel lock lights up in red. What should I do? The electric steering wheel lock lights up in red. What should I do?
The lock sign should go away when the steering wheel lock is disengaged.
youll have to remove the air bag pad and horn contact pad and steering wheel. there is then underneeth a steering lock plate , yull need a steering wheel puller for(also for remoal of the steering wheel) and also to depress the spring loaded lock plate to remove the c-clip then slowlly release the pressure on the lock plate and remove it underneah will be the signal light switch assmbly.
The red steering wheel in the instrument cluster means that the steering wheel is not locked into position. There should be a black lever on the left or right side of the steering column. This is the lever to release when you want to adjust the steering wheel up or down. Push the lever back up to lock into place and the indicator should go out. If it is still on when the steering wheel is locked, then that could be a electrical fault with the sensor.
try and put your key and shack the steering wheel
If you have a steering lock, that can lock your steering wheel in place, until you use the key in the ignition to unlock it.
4.5
pull steering wheel off, remove the steering lock disc, then remove the signal light switch assembly to gain access to the retaining screw that holds the lock cylinder in place,
turn steering wheel lock to lock several times.
Put the key in and move the steering wheel until the key can turn
Jiggle the steering wheel as you turn the key. I've owned several cars in which the steering wheel lock wouldn't let the key turn if there was any pressure on the steering wheel lock.
Yes it is sensible.