0
What else can I help you with?
Why did your Volvo 850 slow down have all the lights on the dash come on and then stall out on you?
its a Volvo
Why will 1996 chevs10 tails lights and dash lights will not come on?
These are on the same fuse. Check for a blown fuse.
Why does the dash indicator lights flash when transmission is slipping on a 1996 Volvo 960?
That is how the car communicates a transmission problem if you couldn't feel it.
Are the dash lights supposed to come on when you hit your brakes in a 1996 corolla?
No, this is not normal. You have a problem.
Dash lights wont work on Volvo changed fuse now car wont start?
Do the dash lights come on now that you have put in a new fuse...Does the motor rotate or try to turn over....If not, it sounds like you have a bad ignition switch....
What is wrong with my 1996 Chevy Astro no dash lights no tail lights I tried the headlight switch Any ideas?
Dash lights and tail lights are on the same fuse.
What fuse in a 1996 Oldsmobile aurora is for the dash lights?
Parking/tail/dash fuse
1996 Chevy silverado running lights do not come on after brake is released?
daytime running light module under drivers side dash
Why dash lights wont come on while all other lights warning lights and all fuses were good?
Probably the dash fuse is blown, or the dimmer switch for the dash lights is bad!
Your dash lights come on and stay on till you turn the head lights on then the dash lights go out If you drive the car down the road the dash lights come back on when you stop they go out 1987 Covette?
Check for a loose ground wire - sounds like lights are backfeeding searching for ground
Why do the dash warning lights come on at idle on a 1997 Isuzu Rodeo?
Which lights?
Why wouldn't the dash lights come on when the key switch is turn on in a 1991 740 Volvo?
If the dash lights do not come on when the key switch is turned on in a 1991 Volvo 740, it could be due to several issues. A blown fuse or a faulty ignition switch might be preventing power from reaching the dashboard. Additionally, problems with the wiring or connectors related to the instrument cluster could also be the culprit. It's advisable to check these components systematically to identify and resolve the issue.
