The light telling you there is something wrong with your braking system Normally means it is low of brake fluid. When it is low of fluid then usually means the pads are worn and may need replacing, assuming you don't have a leak.
The light telling you there is something wrong with your braking system Normally means it is low of brake fluid. When it is low of fluid then usually means the pads are worn and may need replacing, assuming you don't have a leak.
To notify the driver that there is a problem with the brake system.
...I have the exact same problem with my 1993 corolla.......Brake System warning light and discharge warning light
Brake system warning light.....
Yes, a bad ground can cause the brake warning light to illuminate. If there is a poor electrical connection in the grounding system, it can lead to incorrect readings from the brake system sensors or cause electrical faults, triggering the warning light. Additionally, issues with the brake fluid level or the brake system itself can also contribute to the light turning on, so it's important to check all related components.
Brake system fault/failure.
It is your abs system (air bag system) warning light or it is your brake pad wear warning light (depends the year of your van).
If it is your emergency brake warning light, the switch that warns you that the brake is applied may be out of adjustment.HOWEVER - if it is your brake system warning light - GET IT LOOKED AT ASAP - The vehicle's on-board computer is sensing that there's something wrong with it.
Because the e brake is hooked into your braking system and that system has a problem.
You have a problem with the brake system. Once you repair the problem the light will reset itself.
Is it the parking brake light or the ABS light? is it red light or amber?
That your emergency brake is on or that you are low on brake fluid or the brake pads are getting thin or some other brake malfunction
The transit brake warning light, on a Ford, can be reset by changing the brake pads. If the warning light is still on after changing the brake pads remove the fuse for 10 seconds.