J3 chery how do you reset service spanner
The spanner comes up to indicate that the car is due for a service. It should be reset by the garage after the service is carried out.
To reset the service spanner indicator on a 2003 Vauxhall Vectra 2.0 DTI, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal fully three times within five seconds. Then turn off the ignition. Upon restarting the vehicle, the service spanner light should be reset.
To turn off the service spanner light on a Citroën Berlingo, you typically need to reset the service indicator through the vehicle's dashboard. Turn the ignition on without starting the engine, then press the trip reset button until the service spanner icon starts flashing. Finally, keep holding the button until the icon goes off, indicating that the reset is complete. If the light persists, consult the vehicle's manual or a professional for further assistance.
Car due a service? It will need to be reset by a main dealer
To reset the spanner light on a Polo Vivo, first turn on the ignition without starting the engine. Press the gas pedal fully three times within 10 seconds. After that, turn off the ignition. The spanner light should reset, indicating that the service reminder has been cleared. If it doesn’t reset, consult your vehicle's manual or a professional mechanic for further assistance.
this means that's its due a service , if you press and hold the odometer (trip) button on your dash then turn ignition on you should get a countdown from 10 to 0 then the service light will be reset, and............... the spanner has gone!!!!!
Its the service warning light. If you are due your sevice it illuminates. If, however you have just had the service then the mechanic failed to reset the service feature through the dashboard.
you have to press in the button on the end of the wiper switch until you reach the spanner symble with only the ignition on and the car not running then hold for several seconds until it flashes and disapears but this spanner is telling you the car needs a service. Depends which model?
If the service light is in the shape if a spanner then I presume it is like the 2008 model. In which case press and hold the trip button "0.0" before inserting the key. Insert ignition key while holding down the trip button and turn on ignition without starting car. Release the trip button and the service light spanner will cease to flash. Now turn the trip button to the right (clockwise) and it will reset. Service light (spanner) should disappear and only return when the next service is due!
to get the spanner (or service me now) light off all you have to do is turn the ignition on while the engine is off and hold in the trip meter reset button for six seconds or so.
The spanner light is a service light