An engine immobilizer on a 2007 Volvo 2.4i S40 is a security feature designed to prevent unauthorized starting of the vehicle. It works by disabling the engine's ignition or fuel system unless the correct key or fob, equipped with a transponder chip, is used. This system enhances vehicle security by making it difficult for thieves to hotwire the car. If the immobilizer does not recognize the key, the engine will not start, thereby deterring theft.
In the Volvo S40, the immobilizer system is integrated into the vehicle's engine control unit (ECU) and works in conjunction with the key fob. The transponder chip in the key communicates with the immobilizer system to prevent unauthorized engine start. If the key is not recognized, the system will disable the engine from starting. Additionally, the antenna for the immobilizer is typically located around the ignition switch area.
I need a new battery for a 2007 Volvo S40 what are the specifications ?
Press lock then unlock five times on the key fob.
yes its in the passengers side bumper unplug and re plug
Check your gas cap. I had a 2402 on my S40 and the gas cap was bad, easy fix...
The classy Volvo S40 has a standard 5-cylinder, 2.5-liter turbo charged engine. It also has Geartronic transmission.
The PCV valve on a 2004 Volvo S40 is located on the engine crankcase. It is a small rubber valve.
According to the Gates website ( they make timing belts etcetera ) the 2.4 liter five cylinder engine in a 2006 Volvo S40 ( is NOT an interference engine )
CR2450
Which Tires for volvo S40?
We had a light alignment problem on our 2007 S40 and they could not adjust due to the design of the head lights... The fix was to replace the left 2007 S40 head light with a 2008 S40 head light....
To replace a wheel bearing on a 2007 Volvo S40 you need to remove the caliper bolts first and then extract the car's rotor. Then you must put the new bearing on the knuckle.