350
low fuel pressure
where is the cylinder temp sensor on a 2002 ford mustang six cylinder
It is on the drivers side of the rear cylinder head.
combustion happens in the cylinder for the CHT so that is why temp peaks there first - then the hot gas is exhausted for the EGT - i would guess that a larger than normal difference between the temps would indicate a problem with gas flow, perhaps a breach or blockage in a cylinder or the exhaust system
The coolant temp sensor on a 2002 Silverado with the 6.0 engine is located on the drivers side cylinder head close to the front of the cylinder head.
Where is cylinder temp sensor on 2000 Ford f250 with v10 engine
1 temp sensor is under the spark plugs by the dipstick, cylinder head temp 1 temp sensor is in the thermostat housing 1 temp switch is beside the temp sensor in the thermostat housing
A 402, is a 396, .030 over. With a thinner cylinder wall, it will heat up a little faster, and higher. Cylinder head warpage occurs around 230, or 240. Your motor should never run this hot on a consistant basis. 180, to 200 degrees should be the normal operating temp.
coolant temp sensor is on the driver side rear cylinder head. If you look straight down upon the rear head you will see the connector plugged straight into it!goodluck.
The gauge temperature sensor is on the driver side rear of the cylinder head.
more than the miserable car is worth
That is the temp. Gauge sending unit.