If you use a 1 or 2 ground electrodes spark plug, these must have a 0.9mm gap. Besides, you can use a 4 ground electrodes spark plug (Super 4 from BOSCH) with the code FR78X, wich is able to be used with gaps from 0.9 to 1.1mm
The standard spark plug gap for a Volkswagen Polo 1.4i is 0.045 inches. The gap represents the space between the tip and the electrode.
The size socket for spark plugs on a VW Polo is typically 16mm or 5/8 inch, depending on the engine model. It's important to check the specific engine type, as variations can exist. Always use a spark plug socket with a rubber insert to safely grip and remove the spark plug without damage.
no
Begin by removing the spark plug wire from the top of your 2003 VW spark plug. Remove the spark plug with a 5/8 deep well socket, by turning the socket to the left. Reverse the process to install your new spark plugs.
How do reset the oil service light on a 2001 polo?
2000 Polo 1.0Ltr Engine code AER NGK & Beru plugs 0.7mm Bosch plugs 0.9 mm
To change the spark plugs on a VW Polo Vivo, first, ensure the engine is cool and disconnect the negative battery terminal for safety. Remove the ignition coil or spark plug cover to access the spark plugs, then use a spark plug socket and ratchet to unscrew and remove the old plugs. Install the new spark plugs by hand to avoid cross-threading, then tighten them to the manufacturer’s specifications. Finally, reconnect the ignition coils or cover and the battery terminal.
The 1996 VW Polo distributor wire order is 1-3-4-2. The number one spot should be marked on the distributor cap.
Beneath the car, towards the centre between the engine and fuel tank.
go to the spare shop and ask for a spec sheet of your car . and it should be under the gap clearance section of the spec sheet
Where_is_the_radiator_plug_on_a_vw_polo
Fronte Marco Polo ended in 2001.