You spelled it correctly.
Heading, body, and closing
To adjust a door to ensure it closes properly, you can tighten or loosen the screws on the hinges to align the door correctly. You can also check the door frame for any obstructions or misalignments that may be preventing it from closing properly.
Use align=left or align=right.EXAMPLE:"http://wiki.answers.com/">wiki.answers"
To install window guide clips for a 1996 Chevy Caprice, first, remove the door panel to access the window assembly. Then, position the new clips in their designated spots on the window regulator or the door frame, ensuring they align correctly with the window tracks. Secure the clips in place, and reassemble the door panel, making sure all components are properly fitted. Finally, test the window operation to ensure everything functions smoothly.
To align the power windows on a 2000 Grand Prix GTP, pry open the automatic window control box. Unhook the electrical connector and the mounting screws on the door panel. Remove the door panel and unhook the two linkage arms Lower the window regulator and remove the hex bolts. Finally, align the window and put back the removed parts.?æ
Do you mean align? Using alignment options from Layer > Align > choose option. If you mean text indent then use Paragraph panel (Window > Paragraph).
It usually means the motor, gears or both are worn out, weak or misaligned. Remove door panel and check, grease, align, tighten or replace with new or rebuilt motor and or gears, not with used ones (unless you know they work, with a window attached).
causes cells with two decimal places to align vertically correctly
It is, however, more difficult to correctly align the edges of a wound for stapling, and staples generally cost more than sutures.
To align a laser effectively, you need to adjust its position and angle so that the beam is directed accurately towards the target. This can be done by using precision tools and making small adjustments until the laser is aligned correctly.
To install self-closing hinges on your door, first remove the existing hinges using a screwdriver. Then, align the self-closing hinges with the door and frame, making sure they are level. Secure the hinges in place with screws. Test the door to ensure it closes properly and adjust the tension on the hinges if needed.