0
When swaping the engine from a 1985 S10 28 to a 1983 S10 28 will the transmission be the same?
The transmission will be the same because from 1982-1990 GM used the same transmission in the S10 Blazer and S10 Pickups
from what i have been told is even though the engines are the same size the trans might not be interchangable with your 83 model. because im going through the same problem my 85 s10 needs a 700r4 ,but it want interchange with every model of 2.8 engines,so if you know the answer to this please let me know.
What else can I help you with?
Will a transmission from a 1985 2 wheel drive car work in a 1983 4x4 pickup?
I am stuiped
Will a V6 engine transmission from a 1985 Chevy truck fit in a 1983 Chevy truck that originally had a 305 engine?
yes it will you can go all the way to a big block to a 4 cly. that's the great thing about a ChevyAnsweryes,it shoul swap right out
Will a 1985 Chevy V6 engine and transmission fit into a 1983 Chevy V8 truck?
Yes, if you are refuring to the 4.3L V6, Any Small Block GM Transmission will work with this Engine-Transmission combination. Also I do believe the Buick 3.8L V6 will work as well. Any other V6 will not work as a direct bolt in. But anything can be done as long as skill and finance allow.
Will a 1984 1200cc Honda goldwing engine and transmission match a 1985 aspencade?
1984 to 1987 same engine same bike.
Where is the starter motor for a 1985 Lincoln Town Car?
Bottom of engine pass side bolted to transmission.
Will a 1985 Mazda rx7 transmission fit a 1988 Mazda rx7?
Depends, which engine is in the 85, 13b or 12a?
What transmission is in a 1985 econoline van?
The 1985 Econoline Van has an automatic transmission. The transmission can be rebuilt by any licensed transmission shop or purchased new.
Where can you find a diagram of an engine in a Excalibor by Georgie Boy 1985 motorhome?
I have one for a 1983 excalibor with 454. Would that do? Scottcweber@usa.com
Is there a timing chain or a timing belt on the 1985 BMW 318i?
1985 318i (1983-1993 ) Engine code 18 4E1 is listed as being belt driven best wishes
Will a 2.5l 4 cylinder from a 1985 chev s-10 2wd bolt up to the transfer case for a 1985 chev s-10 4wd?
Well the engine doesn't bolt to the transfer case. The engine bolts to the transmission and the transfer case is bolted to the opposit end of the transmission. So, the engine swap should be a simple remove and reinstall operation. Good luck
How do you check transmission fluid BMW 1985 635csi?
the dipstick is near the back of the engine compartment. Check while at running temp
Where is the slave cylinder on a 1985 fiero?
On a 1985 Pontiac Fiero, the slave cylinder is located on the transmission, specifically mounted on the side of the transmission housing. It is accessible from underneath the vehicle, near the bellhousing where the transmission connects to the engine. To reach it, you may need to lift the car and potentially remove some components for better access.
