0
What else can I help you with?
Where is the orifice tube on a 2001 Chevy Suburban?
it is located inside the coupler between the high side and low side fittings on the passenger side of the engine compartment
Were do you add freon on a 2003 ford expedition xlt?
LOCATE THE SERVICE FITTINGS Next, you need to locate the service fittings on the A/C system. There are two: a LOW side fitting and a HIGH side fitting. The LOW side fitting is usually located on the suction hose or line that goes from the accumulator to the compressor. The HIGH side fitting is located on the line that goes from the compressor to the condenser. R12 Low Side 7/16 in. threaded ß----------à R134 Low Side 13mm Quick-disconnect R12 High Side 3/8 in. threaded ß----------à R134A High Side 16mm Quick-disconnect On older R12 systems, the LOW and HIGH pressure service fittings are screw-type Schrader valves. On newer R134a systems, the LOW and HIGH side service fittings are quick-connect style fittings. The LOW pressure fitting is SMALLER than the HIGH pressure fitting.
Where is low side port for refrigerant on 1995 dodge ram 1500 8cly?
LOCATE THE SERVICE FITTINGS Next, you need to locate the service fittings on the A/C system. There are two: a LOW side fitting and a HIGH side fitting. The LOW side fitting is usually located on the suction hose or line that goes from the accumulator to the compressor. The HIGH side fitting is located on the line that goes from the compressor to the condenser. R12 Low Side 7/16 in. threaded ß----------à R134 Low Side 13mm Quick-disconnect R12 High Side 3/8 in. threaded ß----------à R134A High Side 16mm Quick-disconnect On older R12 systems, the LOW and HIGH pressure service fittings are screw-type Schrader valves. On newer R134a systems, the LOW and HIGH side service fittings are quick-connect style fittings. The LOW pressure fitting is SMALLER than the HIGH pressure fitting.
Where is the high side and low side ac fittings located on a 1999 Ford F250?
If your AC works and you can fell the metal lines with your hand, the high side is the line running to the radiator area of the truck first. It will be hot from the pressure. The cold line that is normally dripping with condensation is the low side at the fire wall, pasenger side.
Where is the low-side port located on a 1998 dodge neon?
Where is the low-side port located on a 1998 dodge neon?
Where is the valve to add freon located on a 2001 blazer?
If you do not know where the High side or Low Side (there are two) fittings are then I strongly suggest that you allow someone with experience to service your system. A lot can go wrong! $$$$$$! Y-THINK-Y
How do you replace the fuel filter located on a 1998 Cadillac Seville?
FUEL FILTER 98 SEVILLE UNDER THE CAR DRIVER'S SIDE REAR DOOR AREA QUICK CONNECT FITTINGS CAN ONLY GO ON ONE WAY FUEL FILTER 98 SEVILLE UNDER THE CAR DRIVER'S SIDE REAR DOOR AREA QUICK CONNECT FITTINGS CAN ONLY GO ON ONE WAY
Where do you add freeon your e30?
Freon is added to the low side ac port. The low side and high side ports have different fittings, so that they can not be mixed up.
Does the 1998 Dodge Neon only have 1 grease fitting per side?
Yes, there are only grease fittings on the lower control arm ball joints one each side. It seems that some were delivered with these grease fittings and some just had thread plugs instead.
How can you tell if a 1994 Pontiac Grand Am uses R12 or R134a freon?
There should be a sticker under the hood indicating whether it uses R12 or R134A. Unfortunatley a lot dont. The only way to tell is by the high and low side fittings. R12 fittings are bothe the same size. R134A has two different size fittings where one is larger than the other, ussually the high side fitting is larger than the low side.
Are cylinder numbers 1 through 4 of a 1998 mustang gt located on the driver's side or passenger's side of a 1998 mustang gt?
they are located on the passengers side 1 being closest to the fan
Where is the low pressure inlet for the air conditioning on a 3.4 L 1997 Venture?
It is in the last place you would think. P.s. Its in plane sight R12 Low Side 7/16 in. threaded ß----------à R134 Low Side 13mm Quick-disconnect R12 High Side 3/8 in. threaded ß----------à R134A High Side 16mm Quick-disconnect On older R12 systems, the LOW and HIGH pressure service fittings are screw-type Schrader valves. On newer R134a systems, the LOW and HIGH side service fittings are quick-connect style fittings. The LOW pressure fitting is SMALLER than the HIGH pressure fitting.
