You can find a control module for a 1987 Volvo 240 at various locations, including specialized auto parts stores, online retailers like eBay or Amazon, and dedicated Volvo parts websites such as IPD or FCP Euro. Additionally, local junkyards or salvage yards may have used modules available. It's advisable to ensure compatibility by checking part numbers or consulting with a specialist.
On a 1989 Volvo 240, the control module, often referred to as the engine control unit (ECU), is typically located under the dashboard on the driver's side. It can be found mounted to the left of the steering column, behind a plastic cover. Accessing it may require removing the cover for visibility and adjustment.
Under Dash Passenger side to the right of the kick panel
long answer: yes
four inch
It can be a little expensive to replace the EGR valve on the 1987 Volvo 240 DL. The job takes about 1 to 3 hours and can cost as much as about 240 dollars.
Not 100% sure about the '87, but there is no PCV valve on the 1986 Volvo 240 2.3L. Flame trap and Oil trap, but no PCV.
185/70-R14
Haynes has a good one
The VR is on the back of the alternator.
24 hwy and 19.5 city
To check the ignition module on a 1989 Volvo 240, first ensure the ignition is off and disconnect the battery. Then, locate the ignition module, which is typically mounted on the driver's side fender. Use a multimeter to check the module's resistance and ensure it falls within the manufacturer's specified range. Finally, inspect the wiring and connections for any signs of damage or corrosion, and consider testing the module with a known good unit if issues persist.
very close to 3000 lbs (+/- 150 lbs depending on options)