You add coolant to a C240 at the radiator overflow tank. This allows the radiator to suck in coolant as needed when hot.
To add coolant in a Mercedes C240, first, ensure the engine is cool to avoid burns. Open the hood and locate the coolant reservoir, typically marked with a cap labeled "Coolant." Remove the cap and add the appropriate type of coolant mixed with water (if necessary) until it reaches the recommended level indicated on the reservoir. Finally, securely replace the cap and check for any leaks before closing the hood.
at the top
You can use any type of SAE certified coolant in your 2003 Mercedes-Benz. The coolant should have a temperature range of -25 degrees Fahrenheit to 120 degrees Fahrenheit.
how to add coolant to 1991 lumina?
The overflow resavour is where you add coolant
no cap, just the coolant tank, add to this to add coolant../
You should not mix colors or brands of coolant.
The coolant add/overfill jug is on the left side of the motor when your looking at it. Add coolant up the closest line towards the top, and only when the engine is cold.
Add coolant to the full cold line on the coolant reservoir when engine is cold.
To change the thermostat in a Mercedes C240, first ensure the engine is cool and disconnect the battery. Drain the coolant and remove any components obstructing access to the thermostat housing. Remove the bolts securing the thermostat housing, take out the old thermostat, and replace it with a new one, ensuring proper alignment. Finally, reassemble the components, refill the coolant, and reconnect the battery.
you add coolant untill it is full ?
Radiator. Remove the cap and add coolant there.