on top of the engine block
breather pipes.
To connect the carburettor hoses for a Mazda 323, first identify the various hoses: the fuel line, vacuum lines, and any overflow or breather hoses. Ensure the engine is cool, then attach the fuel line to the inlet on the carburettor, ensuring a secure fit. Connect the vacuum lines to their respective ports, referencing a diagram if available, and attach any overflow or breather hoses as needed. Finally, double-check all connections for tightness and proper routing to avoid leaks or performance issues.
driver side of engine where in/out radiator hoses connect.
thats the heater control valve
You don't need a diagram. Just remove the inlet and outlet heater hoses going from the engine compartment to the heater core. Now connect these two hoses together using a coupler. Do not just plug these hoses, or the engine will overheat, connect them together as described.
There are two hoses that connect the radiator to the engine block. On older cars, the thermostat would be where the top hose connects - ie where it is easy and convenient to get at, etc. Unfortunately, on your car the thermostat is located where the bottom radiator attaches to the engine block - closer to the firewall, under the breather, etc, where it is a total pain in the ass to get to.
The thermostat is commonly located on the front of the engine. It can be located where either the upper or lower radiator hoses connect to the engine.
right on the top of the engine take off the breather pan and disconnect the vaccumme lines to expose the carburetor and look closer to the front of the engine it is kind of hidden by the vaccumme hoses. but it is right there.
There are hoses in the engine compartment that go to the heater core. You can remove the intake and out going hoses from the heater core. You have to either block off these hoses or connect them together, depending on the make of the vehicle.
A breather hose is designed to allow air to flow in and out of a sealed system, such as the engine or fuel tank of a vehicle. It prevents the buildup of pressure or vacuum, which can lead to leaks or damage. Additionally, it helps maintain proper pressure levels, ensuring efficient operation and preventing contaminants from entering the system. Overall, breather hoses are essential for the proper ventilation and function of various mechanical systems.
Remove the sparkplug cables, breather hose, and remove the valve cover. The gasket is a permanent type and comes as a 5 piece kit that simply pushes into groves in the valve cover. Once installed, replace the valve cover and connect the breather hoses and sparkplug cables.
On a 1997 Chevy truck, the heater hoses connect to the heater core, which is located inside the dashboard. The two hoses run from the engine's water pump and thermostat housing to the firewall, where they connect to the inlet and outlet ports of the heater core. Typically, the hose coming from the engine connects to the inlet side of the heater core, while the other hose returns to the engine's cooling system. Always ensure the connections are secure to prevent leaks.