answersLogoWhite

0

On a 2006 Land Rover LR3, the fuse for the trailer's running lights is typically located in the fuse box under the hood, specifically in the main fuse box. You should check the owner's manual for the exact fuse number related to the trailer lighting circuit. Additionally, some models may have a separate trailer wiring harness fuse, so it's also worth inspecting any auxiliary fuse panels if applicable. Always ensure the vehicle is turned off before checking or replacing fuses.

User Avatar

AnswerBot

1w ago

What else can I help you with?

Related Questions

Why do head lights stay on?

They are day time running lights. You can turn them of by pulling out the day time running light fuse. Saab manual will help you locate the fuse.


88 Jeep Cherokee trailer wire how 2 install?

To install trailer wiring on an '88 Jeep Cherokee, first locate the vehicle's tail light harness. You'll typically need to splice into the rear light wires for the brake, turn signals, and running lights. Use a trailer wiring harness adapter if available for a simpler installation; otherwise, ensure proper connections and use heat shrink or electrical tape to protect the splices. Finally, test the connections by hooking up the trailer to ensure all lights function correctly.


What is wrong if your 1995 Mitsubishi gal ant taillights and cluster lights went out even if you changed the fuse but it keeps popping?

You have a short to ground in the running lights circuit. It will take some detective work to locate the problem. Visually inspect the wiring harness leading from and up to the tail lights. If you have a trailer plug socket, inspect the wiring and plug. Look for damaged, pinched and bear wires.


How do you fix 1990 Honda civic daytime running lights?

Daytime running lights on a Honda Civic are the same as normal headlights. To fix or replace them, locate the headlight housing in the front of the car. Remove the plastic housing and replace the bulbs.


How do you turn off daytime running lights on a 2002 ford focus?

Simplest solution is - locate the fuse that control the DRL circuit and pull it out.


How do you locate the axle on a trailer?

at list 60% back from the frount


Where to locate stamped vin on utility trailer 6925-01?

16vpx202762h9558


Right side trailer brake or turn signal don't work but running lights work?

i have the same problem on my 1998 jgc. havent found the problem yet but being this vehicle has separate turn and brake lights, i would suspect a faulty signal converter unit in the vehicle. im trying to locate it to test. will post when i learn more. Simple fix (very common...): The trailer isn't completely grounded - run a wire from your trailer to the tow vehicle. Attach the wire to a bolt or piece of metal that isn't painted (on both ends) and you should be good! Good luck. Got a chance to check out my issue with my 98 jgc .found trailer package is fuse protected. i had a 15 and 20 amp fuse fuse blown located behind passengers kick panel access cover. this turned out to be a simple fix for my problem, worth checking first. the running lights probably were not affected because they are a single signal system and not tied into the converter. hope this helps.


Where is a local Kelly running warehouse?

I checked their website at http://www.kellysrunningwarehouse.com/ and could not locate a retail location. this may be a store that operates exclusively online. It may help to call there help line at 800-421-0551.


How do you turn off the daytime running lights on a 2011 Suzuki SX4?

To turn off the daytime running lights on a 2011 Suzuki SX4, locate the headlight switch on the dashboard. Turn the switch to the "OFF" position, or you may need to adjust the settings in the vehicle’s fuse box by removing the fuse related to the daytime running lights. Always consult the owner's manual for specific instructions and safety precautions. If you're unsure, consider having a professional handle the adjustment.


1995 Mitsubishi montero the alternator over charged to 16.7 volts the alternator was replaced the alternator now there is no head lights running lights or dash lights what could be wrong?

mostly likely when you got the overcharging a fuse or relay was blown. need to locate and replace fuse most likely but possibly a relay.


Which technology is used to locate specific trailer and even pallets?

Currently, RFID technology is used.