In the radiator
In the coolant reservoir in front of the engine.
The water and coolant is put in the coolant reservoir for the location of this refer to the owners manual. It is best to do this when the engine is cold otherwise you run the risk of getting boiling water all over you. the mixture of coolant to water should be about 50/50.
In the powers steering pump reservoir.
The coolant for a BMW x5 is placed into the coolant overflow tank on the left side of the engine compartment. It should be filled to the full mark when the engine is at operating temperature.
To the left of the engine - in the coolant tank
On the right of the radiator or tlright in front of the intake filter tube there is black container with a cap, you add it there. Remember you must bleed the system
i know its a bit different but all u need is ATF. beemers don't take power steering fluid at least that's what my brother told me
At the radiator or overflow tank. Do not add water, add coolant.
In the top of the radiator but be sure you've put all the pipes back on
To add coolant to a 1998 BMW 740i, locate the coolant reservoir, which is typically found near the front of the engine bay on the driver's side. Remove the cap from the reservoir, and pour in the appropriate coolant mixture, ensuring you do not overfill it. Always check the engine temperature and allow it to cool before adding coolant to prevent any injuries or damage. After refilling, replace the cap securely.
Look at the radiator, it should be in the front. It has a cap on it, take it off and you can put coolant in side.
The Honda 450 foreman 98-04 is air and oil cooled and does not require antifreeze or coolant.