The 960 has 4 regular gears and an over-drive gear.
To change the neutral safety switch on a 1995 Volvo 960, first, disconnect the battery to ensure safety. Then, locate the switch on the transmission, which is typically near the gear selector. Remove the electrical connector and the mounting bolts to take out the old switch. Install the new switch in reverse order, ensuring it is properly aligned, and reconnect the battery before testing the vehicle.
Possible gear position sensor problem. Diag should reveal this.
i need the code to unlock the radio on my Volvo 960 1996
The lug nut torque for that 1993 Volvo 960 is 63 ft.lbs.
A common problem with alot of Volvo's is the Overdrive. Basically the high gear. If it wont shift into high gear it means that the "Overdrive" is activated and won't shift into high gear. You need to see if there is a little upwards pointing arrow on your Dashboard Cluster. If there is then you need to replace your Overdrive Solenoid.
how much will it cost to replace or repair rod for 1996 volvo 960?
I would like to install a timing belt on my 93 960 volvo / how do I line up the cams with the crank shaft???
Yes, the transmissions are compatible. The S90 was the re-branding of the 960 until 1998 or 1999.
firing order is 1342 for a Volvo 960 (1996) 1342 is the firing order for a 4 cylinder which would be a 940- as for the 960, the order is 153624 where 1 is closest to the front of the car and 6 to the cabin. (for 2.9 liter motors in '96 960)
The Volvo 960 typically does not come with a turbocharged engine; it is equipped with naturally aspirated inline-six engines. However, some variants of the Volvo lineup from that era, like the 850, offered turbocharged options. If you're looking for a turbocharged performance, you might want to explore other Volvo models or consider aftermarket modifications for the 960.
It means you need to replace the PNP valve (otherwise known as the gear positioning switch) then you need to reset the computer