The EGR temperature sensor on a Volvo D16 engine is typically located on the exhaust gas recirculation (EGR) system, specifically near the EGR cooler or manifold. It measures the temperature of the exhaust gases before they enter the EGR system. To locate it precisely, refer to the engine's service manual, as the exact position can vary by model and year. Make sure to follow safety protocols when inspecting or replacing the sensor.
Try looking on the EGR valve underneath the intake manifold.
EGR sensor ( gas temperature sensor ) is monted near the EGR valve, which is install into the EGR tube.
The EGR temperature sensor is located in the intake manifold between cylinders 3 and 4
Remove the wiring harness from the EGR temperature sensor. Remove the two retaining screws from the sensor. Reverse the process to install the new sensor.
The EGR valve and the EGR sensor work together. The EGR gas temperature sensor is mounted near the EGR valve. The sensor detects the temperature of the exhaust as it moves through the valve. The information is sent to the ECM and in turn the EGR on/off time is regulated precisely and more efficiently. Any malfunction with the EGR gas temperature sensor will set off a code 35 ( Info taken from HAYNES MANUAL)
On the EGR valve assembly.
Yes.
It doesn't have it's own sensor. It recirculates exhaust gas according to the engine temperature and 02 sensor.
The EGR sensor is part of the EGR valve on the rear pass side of the engine.The EGR sensor is part of the EGR valve on the rear pass side of the engine.
The P1409 OBD-II code indicates an issue with the Exhaust Gas Recirculation (EGR) system, specifically related to the EGR temperature sensor circuit. This code suggests that the engine control module (ECM) has detected an abnormal reading from the EGR temperature sensor, which can lead to increased emissions and engine performance issues. Common causes include a faulty EGR valve, a malfunctioning temperature sensor, or issues with wiring and connectors in the EGR system. It is advisable to diagnose and address the problem to maintain optimal engine performance and compliance with emissions standards.
The egr position sensor is part of the valve. It does not have a flow sensor.
the egr sensor is located on the engine compartment firewall next to the egr solenoid