Its in the boot on the left hand side - behind the flap where you change the bulbs, you may have to undo it with a screwdriver (2 plastic caps).
if its the main fuse box your after its under the bonnet above the battery under the black cover, be carefull as these boxes have a tendancy to break when trying to undo.
Thanks
J
To change the fuse in a 2002 Holden Astra, first locate the fuse box, which is usually found under the dashboard on the driver's side or in the engine compartment. Use the fuse puller tool, often found in the fuse box, to remove the blown fuse by pulling it straight out. Replace it with a new fuse of the same amperage, ensuring it's seated properly. Finally, close the fuse box and check if the electrical component is functioning correctly.
If you have an S1 (old shape) 106 the fuse box should be down to the right of the steering wheel behind a panel that should just pull off. Youl see a small handle to grab it. If you have an S2 (new Shape) the fuse box is under the bonnet just above the battery. You should see a small black box. There is a catch on the front that comes off to open it.
blown fuse in fuse box under hood for alt or fuse 19 in the inside fuse box
To replace the starter relay on a 1999 Holden Astra, first, locate the fuse box, which is typically found under the dashboard or in the engine compartment. Remove the cover and identify the starter relay, usually labeled in the diagram on the cover. Carefully pull the old relay out and insert the new one in its place, ensuring it is securely fitted. Finally, replace the fuse box cover and test the ignition to confirm the replacement was successful.
To change a fuse in a bmw 750li first locate the fuse box either near the trunk or glove box. There should be a diagram with the box telling you which fuse is which. Remove the desired fuse and replace with a new one.
To replace a fuse box, you will need to turn off the power, remove the old fuse box, install the new one, connect the wires correctly, and test the new fuse box to ensure it is working properly. It is recommended to hire a licensed electrician for this task to ensure safety and compliance with electrical codes.
First locate the fuse in the fuse box, then pull old fuse out and insert new fuse.
The receiving end must be damaged. Gain access to the back side of the fuse box, locate the wires connected to that circuit, cut and splice in a 20 amp in-line fuse holder, install a new 15 amp fuse into the new fuse holder and replace fuse box with the new fuse exposed to one side to gain access for future needs.
To replace a fuse in a fuse box, first, locate the fuse box in your home. Turn off the main power switch to ensure safety. Identify the blown fuse by checking for a darkened or broken filament. Use a fuse puller or pliers to remove the blown fuse. Insert a new fuse of the same amperage rating into the slot. Turn the main power back on and test to ensure the new fuse is working properly.
the fuse is one of the ones on top of the battery box
You simply unscrew it counterclockwise. Get a new fuse of the same rating and screw it back in.
The fuse box is located in the glove box and under the hood on the driver side above the batterie