On a 1997 Land Rover Discovery, the OBD-II port is typically located under the dashboard on the driver's side. You can find it near the steering column, often to the left or right of the pedals. It may be covered by a panel, which can be easily removed to access the port.
The 2001 Land Rover Discovery 2 OBD 2 port is on lower right corner of dash, next to console
In a RHD the port is in the passenger foot well above the passengers right foot.
Your vehicle is too old for the OBD 2 reader to work on it. Not sure what system would work as manufacturers used their own dedicated systems before OBD became the industry standard. Steve
The 2002 Toyota Land Cruiser OBD 2 port is under driver side dash above accelerator pedal
hello its hide in a compartment under the steering wheels at the bottom left hope it will help you!!!
The obd 1 port is next to the battery
To reset the check engine light in a Land Rover Freelander, you can use an OBD-II scanner to read and clear the trouble codes. Simply plug the scanner into the OBD-II port, turn on the ignition, and follow the scanner's instructions to erase the codes. Alternatively, you can disconnect the vehicle's battery for about 15 minutes, then reconnect it to reset the light. However, ensure the underlying issue is addressed to prevent the light from reappearing.
good luck! There is no OBD port on a vehicle that old
The OBD port is under the dash on the driver side.
The 2000 Toyota Land Cruiser OBD 2 port is behind fuse cover
Obd-on board diagnostic. The port is the plug the scan tool or code reader connects to.
OBD II port should be under the dash on the drivers side.