alrite mate, have you managed to resolve the problems that you were having with your stop solenoid. I am currently experincing problems with mine and any info you could give me regarding this would be greatly appricitated. if you have any info please e-mail me on potter39@hotmail.co.uk. Thanks.
which one?
Its on back side of injection pump (facing the engine front).
To change the stop solenoid on a Peugeot 106 Zest2, first disconnect the battery to ensure safety. Remove the electrical connector and any retaining screws or clips holding the solenoid in place. Carefully take out the old solenoid and install the new one by reversing the removal steps, ensuring it is secured properly. Finally, reconnect the battery and test the system to ensure proper operation.
under back seat
Yes.
Tank capacity is 45 litres of fuel.
how do you take clips off
hi can any one help me as i have a peugeot 106 quicksilver 1.4 my fuel pump has stop working it just wont pump the fuel up but when u turn the car over and u stop turning it over u can here the fuel pump work but it just dont work it does not come on when u just turn the ignition on as it should do any idea thanks simmors2009@live.com
Ive read on forums it has to be cut off with a dremmel etc Bit pointless it being there!
The fuel pump on a Peugeot 106 is located in the fuel tank. To access it, you typically need to remove the rear seats and the inspection cover, or in some cases, drop the fuel tank. It's essential to ensure safety precautions are taken due to the flammable nature of fuel during this process.
Check the Stop Solenoid if it's a diesel. Just fixed one of these. about
Not really an option, but if you find it burning extra fuel then replace the injectors.