To change the stop solenoid on a Peugeot 106 Zest2, first disconnect the battery to ensure safety. Remove the electrical connector and any retaining screws or clips holding the solenoid in place. Carefully take out the old solenoid and install the new one by reversing the removal steps, ensuring it is secured properly. Finally, reconnect the battery and test the system to ensure proper operation.
Ive read on forums it has to be cut off with a dremmel etc Bit pointless it being there!
No, as far as I can see it does not.
alrite mate, have you managed to resolve the problems that you were having with your stop solenoid. I am currently experincing problems with mine and any info you could give me regarding this would be greatly appricitated. if you have any info please e-mail me on potter39@hotmail.co.uk. Thanks.
Check that the solenoid is working and is the right one. Make sure the rubber is good and that the middle has not dropped out.
To change the stop solenoid on a Skoda Felicia, first, disconnect the battery to ensure safety. Remove the wiring harness connected to the solenoid and unscrew the solenoid from the fuel pump. Install the new solenoid by screwing it in place, reattach the wiring harness, and finally reconnect the battery. Always check for any leaks and test the vehicle to ensure proper operation after the replacement.
Its on back side of injection pump (facing the engine front).
Check the Stop Solenoid if it's a diesel. Just fixed one of these. about
You can use an oil stop-leak product to stop an oil leak on your 2002 Peugeot 206 1.4.
yes
1994bmw318i check the idle soleniod
Don't buy it any cigarettes >:)
Sounds like a problem in the fuel system. Fuel is finding it's way into the cylinders after the ignition is switched off. Does the engine run on as normal, or run erratically after you switch the engine off? The former could be an electrical problem (something not switching off properly). The second could mean that fuel is building up in the system somewhere and discharging into the engine when the power is switched off.