usually in the trunk,some are in the passenger right side kick panel. some galants do not even have one.Ex. 1995 galant s does not have one.
it should be in the trunk, you will see a hole in the rear trunk panel where the rest button is located.
DISCONNECT THE BATTERY FOR A FEW MINUTES.
No
You cannot reset a code. Take out your radio. Check the serial number on it and call Mitsubishi dealer. They will check a database and give you a code.
To reset the oil change light on a Mitsubishi Galant, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off and then start the engine to ensure the light is reset. If the light remains on, repeat the process.
It needs to be taken to a dealership. It's done with a scan tool.
There is no reset button.
Reset button for what? If you are talking about the check engine light, there is no reset button. Unhook the battery for 5 minutes and see if that resets it. If not, then it can be reset with a scanner. Of course it will come right back on if the problem is not corrected.
There is a reset button on the front.
The best/easiest way is to pull the ground cable to the battery for 1 minute and re-connect.
Hit the reset button.
The vehicle may have to complete a relearn cycle which can take a couple hundred miles.