0
What else can I help you with?
Why would the turn signals quit working when the hazard lights still work and the flasher and bulbs have been replaced on a 1995 Chevrolet Corsica?
Check the flasher for the turn signals which is under the dash on the left side of the steering column . It is different from the emergency flasher.
I replaced the flasher and my turn signals still don't work on my 1999 Mercury Cougar?
If you replaced the flasher on your 1999 Mercury Cougar and your turn signals are still not working, you should check the turn signal fuse. This fuse is located under the dashboard on the driver's side of the vehicle to the left of the steering column.
What is the next place to check when turn signals do not work and flashers do and flasher unit has been replaced?
You di dnot mention the kind of car. Most cars have a turn signal flasher and an emergency flasher.Are you sure that you replaced the right one?
My blinkers come on but won't flash. I replaced the flasher and still won't blink. Yes I am sure I changed the right one.?
Some vehicles has a flasher relay for the turn signals and another one for the hazard lights. Are you sure you replaced the correct one?
Why are Hazards working but indicators not flashing on Audi tt?
It contains two relays, one for hazard lights and the other for turn signals. The one for the turn signals is defective and must be replaced.
1994 sunbird turn signals won't work. Have replaced the bulbs and relay don't know what to do next help?
Turn signal flasher?
Turn signals dont work replaced the switch?
Check fuse Check bulbs--they are double filamented with the smaller for turn signals Replace turn signal flasher--Most common problem
Emergency flasher works turn signals don't 94 ford econoline?
There are two relays, one for the emergency flasher and one for the turn signals. Replace the Flasher Relay for the turn signals, it is defective.
You replaced the flasher relay but the turn signals still don't work at all Hazards work fine Why?
on the Chevy beretta there are 2 flashers one is right next to the steering column to the behind the plastic dash piece,this is your turn signal flasher replace it and your signals should work.
What would cause the turn signals and emergency lights not to work on a 91' Acura Legend even after the fuses were replaced?
you might have a bad Flasher relay.
What does a flasher do in a 2000 Toyota Corolla?
The flasher is a type of switch that regulates the turning on and off of your vehicle's turn signals and hazard signals.
You have a 1992 caprice and you can't get your hazard lights to work but your turn signals work fine Please help?
If your hazard lights don't work but your turn signals do work it could be that your Hazard Lamp Flasher needs to be replaced. Your car has both a "hazard lamp flasher" and a "turn signal lamp flasher". Your "turn signal lamp flasher" is working but your "Hazard Lamp Flasher" may not be working. Buy a new "hazard lamp flasher" and install it. The hazard lamp flasher is located behind the instrument panel to the left of the steering column.
