why doesn't my rpm gauge and temp gauge, fuel gauge not work
while driving the rpm gauge work perfect, when start accelerating the rpm can not exceed 3 with interruption in the engine
7 Rangers appeared in "Power Rangers RPM."
the compressor is coupled with engine.when the engine runs at 1000 rpm ,the compressor also will work at that rpm ,so that is air is compressed in tanks and it is used for applying.
anywhere from 800 to 1000 RPM.
100-350 rpm
Around 6500 RPM's.
If you're running at 70 RPM (revolutions per minute), that is your current RPM. RPM is a measure of how many times a wheel or object rotates in one minute. Therefore, when you say you are running at 70 RPM, you are already at that specific rate of rotation.
Between 9000 and 14000 RPM at wide open throttle no load.
This will depend on what the "work" is. Example, if the vehicle is in neutral gear, on low rpm idling of course the engine is doing less work. But when the accelerator is pressed to rev up, then the engine is doing more work. Another example, cruising on a flat highway at high speed but engine's rpm is low when at top gear, hence engine is doing average work. But let the vehicle go up an incline and speed goes slow and the engine's rev goes high when on first gear, hence the engine is doing a lot of work.
At about 1700 RPM's you're going 55.
what year is the car and do you have any other problems.If the car starts hard and rpm doesn't work try replacing crankshaft sensor