0
What else can I help you with?
WHAT IS A OD?
OD stands for outside diameter
How do you measure OD of pipe?
outside to outside
What is OD plus 2.75?
OD is Outside Diameter - at least when you are talking about pipe...
What is difference OD and NB of pipe?
NB = inside diameter of the tube. OD = outside diameter of the tube.
What is OD of wire?
OD stands for "outside diameter," referring to the diameter of a wire or cable measured from the outer edges. Knowing the OD of a wire is important for selecting appropriate connectors, conduit, or cable management systems. It helps ensure proper fit and compatibility with other components in an electrical system.
What is Id versus od size in copper fittings?
id means inside diameter, od means outside diameter, copper pipe and tubing is measured by the od, therefore the od the pipe or tubing will be the same as the id of the fitting
What does the abbreviation OD mean?
it means outside diameter as opposed to id which is internal diameter
Do 3 inch tubing and 3 inch pipe have the same outside diameter?
Yes OD never change
Is passport required for Norway?
For people from outside the European Union: yes. See http://goscandinavia.about.com/od/visadocumentation/a/norvisainfo.htm
Can you replace the 16 inch Alloys on Audi A4 for 18 inch will it affect transmission speedo?
Its not the rims, its the outside diameter of the tyre. The OD of a standard 16in is quite close to if not the same as the OD of a lo-pro on a 18in.
How do you calculate outside diameter of a steel coil?
To calculate the outside diameter of a steel coil, you first need to determine the inside diameter (ID) and the thickness of the steel material. The outside diameter (OD) can then be calculated using the formula: OD = ID + 2 × thickness. If the coil is wound in layers, you may also need to account for the number of layers by adding the thickness multiplied by the number of layers to the ID.
How do you determine the OD of a pipe?
Measure the outside diameter of a pipe with some calipers. If you don't have these then you can get a good idea by using a ruler or tape measure, making sure to go through the mid point. It's outside wall to outside wall.
