0
What else can I help you with?
Why wont your Yamaha blaster go into gear?
A Yamaha Blaster not going into gear is typically a sign of an issue with the clutch. To troubleshoot, try to adjust the clutch at the lever. If this doesn't solve the problem, the shot clutch pack may need to be replaced.
How do you many clutch plates in a Yamaha blaster clutch?
there should be 6 clutch plates
Why wont my clutch lever work on your Yamaha blaster?
Well cable could be froze up. Replace the clutch cable. If cable is working adjust cable. If the clutch cable is adjusted then it's time for a new clutch
How do you replace a clutch on a Yamaha blaster step by step?
Buy a yamaha blaster manual. Shows you step by step picture by picture.
Is there a certain order to put clutch plates in a Yamaha blaster?
7. the answer is 7
What are the torque specs for a 2004 Yamaha blaster outer pressure plate for the clutch springs?
Yamaha Blaster Inner Clutch Spring Torque(5 Bolts with Springs) 4.3Ft-Lb. (51.6In-Lb.) Also, Center Bolt 5.1Ft-Lb. (61.2In-Lb.)
What can cause a v star Yamaha 650 have front end vibration?
How do you adjust tbe clutch on a yamaha vstar
Where is oil pump on 2003 Yamaha Blaster?
It is located on the right side of the engine and is the most forward part of the clutch cover
Can you adjust the clutch pack in a pw 80 Yamaha?
Yes, you can adjust the clutch pack on a Yamaha PW80. To do this, you'll need to access the clutch cover and adjust the clutch cable tension using the adjustment screw. Be sure to follow the manufacturer's specifications for proper tension to ensure optimal performance. Regular maintenance and adjustments can help prolong the life of the clutch and improve shifting.
How do you adjust a clutch Yamaha 2005 v star classic?
To adjust a clutch on a 2005 Yamaha V Star Classic, pull the clutch lever slightly and loosen the large lock nut on the cable adjuster. Twist the cable clockwise and adjust the cable's tension until there is only 1/8 inch of free play at the clutch lever.ÊÊÊ
How do you adjust clutch belt on 89 Yamaha g2 golf cart?
you cant adjust a drive belt, you problem is in the secondary clutch, I am sure you need to replace the sliding clutch and put a spacer in front of the hub.
What does the clutch look like in a 1990 Yamaha blaster?
the plates are round with a cork like coating on the outer surface about 3/4" wide
