$130.90
when my 89 mighty max did this I had to push the tailgate in while I opened the handle. Once open adjust or graphite the connections
I have no clue where voltage regulator is at on 1994 Mitsubishi mighty max can you help?
Mine is a cable clutch so there is no slave cylinder. But if yours is a hydraulic clutch then it should be located on the firewall on the driver side close to the master cylinder.
500
with a floor jack.
Timing belt replacement on 88 mighty max
Mitsubishi 2.3L 4D55 Turbo
If your 1991 Mitsubishi Mighty Max dies after you start it up it could be one of several issues. There can be issue with the batter, fuel relay, or distributor.
To change the clutch cable on a 1991 Mitsubishi Mighty Max truck, start by lifting the vehicle and securing it on jack stands for safety. Disconnect the old cable from the clutch pedal assembly inside the cabin and the clutch fork under the hood. Remove any retaining clips or bolts holding the cable in place, then thread the new cable through the same path, ensuring it is properly adjusted. Finally, reconnect the cable to the pedal and clutch fork, and check for proper operation before lowering the vehicle.
I'm no mechanic, but from what I have read, the later model engines have hydraulic lash adjusters that can be tested and replaced(Haynes manual).
Autozone or Advance parts