0
What else can I help you with?
What pH do fish carp need in a pond?
pH range for Koi is 6.5 - 8.5. Outside of this range they will endure stress.
How long does tap water have to sit before it is safe for koi in a pond?
Tap water typically needs to sit for at least 24 hours before being added to a koi pond to allow chlorine to evaporate. If the water is treated with a dechlorinator, it can be used immediately. Additionally, it's important to ensure that the temperature and pH levels of the new water match those of the pond to minimize stress on the koi. Always check for any contaminants or chemicals in the tap water that could harm the fish.
Does high PH cause white foam on pond surface?
A high pH level can sometimes result in white foam on a pond surface due to excess organic matter breaking down and producing foam. This foam can be harmful to fish and other aquatic life in the pond. It is important to monitor and maintain the pH levels within a safe range to prevent foam formation.
Does pond water effect plant growth?
Yes, pond water can affect plant growth depending on its nutrient content, pH levels, and presence of contaminants. Some plants may thrive in nutrient-rich pond water, while others may be sensitive to high levels of certain nutrients or pollutants. It's important to test pond water quality and tailor plant selection accordingly.
What happens to pH when chlorine level is high?
Since most types of chlorine are very high in PH it may effect the over all PH of the water if it is not buffered.
What is the pH value of pond water?
The pH value of pond water can vary depending on factors such as pollution and natural processes. Generally, pond water tends to be slightly acidic to neutral, with a pH range of around 6.5 to 8.5. Regular testing is recommended to monitor the pH levels in pond water.
How many gallons does a fish tank have to be to keep a koi fish in?
From numerous websites, I've seen answers that range from 50 gallons, 100 gallons and as much as 1000 liters (260+ gallons)! I use the 100 gallons per koi estimate and have had no problems for the past 4 years of having my pond. I have ten koi in a 1000 gallon pond and a second 1500 gallon pond that is connected with a stream that has 14 koi. Two waterfall boxes, one skimmer and two 3600 gallon pumps running it. PH is always around 7.2 and haven't had any diseases, etc occur in the 4 years.
Can you put sand in your pond?
You can but with my experience it will lower your pH,my pH was at 7.8 then i add sand it drops to 7.
What is the harmful effect of abnormal pH in formulation of medicines?
A low pH is an abundance of hydrogen ions, where a high pH is an abundance of hydroxide. Both are important components in the formation and stability of many chemicals.
How can you figure out what is making your pools pH balance high?
The pH of your pool should be ideally 7.4. this will change if you add chlorine as this will have the effect of raising pH which is why you need to control the pH with an Acid such as sodium bisulphate or marked up as pH minus (pH-) . Also when you add any water from the tap if the pH of incoming water is high then this will also change the pH. Watch out for low Total Alkalinity as this can cause pH bounce where you get fluctuating pH readings.
How does pH's of different liquids effect metal nails?
The pH of different liquids can affect metal nails by causing them to corrode or rust at a faster or slower rate. Low pH liquids (acidic) can accelerate corrosion of metal nails, while high pH liquids (alkaline) may have a protective effect or inhibit corrosion. The severity of the effect will depend on the specific pH level and chemical composition of the liquid.
What is the pH of HFCS beverages?
HFCS (high fructose corn syrup) should have no effect on pH, The amount of dissolved carbon dioxide, phosphoric acid, citric acid and others can lower the pH to as low as 2.5
