I bought a new Sweatshirt from Old Navy with Faux Fur, and I am unsure about washing it. Can anyone give some tips or tell me how they wash their faux fur items?
Applying a new stain on top of an old stain can result in uneven color distribution and adhesion issues. It's generally recommended to strip or sand the old stain off before applying a new one for better results.
You re-stain with a darker stain. Good luck.
If the stain is not too old, vinegar will lift most of it out.
with a lot of windex..... (.__.')
I agree with Charles. I would also sand the piece of wood with the stain a bit then apply the darker stain.
200 years old
Yes you can, just clean the old stain with steel wool or fine sandpaper before you do.
be careful, if it is an antique removing the old stain could depreciate its value. But, it you don't care or if you have already taken off the old stain, then you can apply it witha rag going towards the grain. Remember when it is dry to put varathane on it
To stain new wood to match old wood, start by selecting a stain that closely matches the color of the old wood. Test the stain on a small, inconspicuous area of the new wood to ensure it matches before applying it to the entire surface. Apply the stain evenly and allow it to dry completely before comparing it to the old wood. If the color is not a perfect match, you may need to apply additional coats or try a different stain color until you achieve the desired result.
Yes you can
26