Mushrooms are almost entirely water, so the weight of 5 gallons of water will be a good estimate of the weight of mushrooms in the 5 gallon pail.
Five gallons of fresh water weigh 41.7 pounds, because each gallon of water equals 8.34 pounds.
About 95 pounds.
42.6 lbs.
From personal experience, a 40 lb. bag will fill a five gallon pail heaping and spilling over a bit. So, a five gallon pail will hold approximately 35 pounds of wood pellets flush to the top.
8 lbs should fit in a gallon pail so a 10 gallon pail will hold 80 lbs. So, yeah it should hold. hope that helps.
The number of 5-gallon pails in a ton of barley depends on the weight of the barley and the volume of the pail. Barley typically weighs about 48 pounds per bushel, and there are approximately 56 pounds in a bushel, which translates to roughly 2,000 pounds in a ton. A 5-gallon pail can hold about 37.5 pounds of barley when filled. Therefore, there would be approximately 53 pails in a ton of barley (2,000 pounds ÷ 37.5 pounds per pail).
There are approximately 0.67 cubic feet in a 5-gallon pail.
Fill the 3 gal pail and pour into the 5 gal pail. Refill the 3 gal pail and pour two gallons of it into the 5 gallon pail - filling the 5 gallon pail and leaving 1 gallon in the 3 gallon pail. Dump out the 5 gallon pail and pour the remaining 1 gallon from the 3 gallon pail into the 5 gallon pail. Fill the 3 gallon pail one more time and pour that into the 5 gallon pail with the 1 gallon already in it and you have 4 gallons.
5 gallon
The weight of a pail of water will depend on the volume of water it can hold. On average, water weighs about 8.34 pounds per gallon, so you can calculate the weight of the water by measuring the volume of water in the pail and multiplying it by the weight per gallon.
A 5-gallon pail of concrete typically weighs around 100 pounds. This weight can vary depending on the specific type of concrete mix being used.
Depends on the pail, many are different sizes.
Easy. Fill the 7gal pail to the full mark (7 Gallons) with water. Then pour, from the 7 gallon pail, water into each of the 3 gallon pail up to the full mark. The remaining water left in the 7 gallon is 1 gallon. Pour this gallon into the aquarium. Fill the 7 gallon pail with water, again to the full mark, and then add to the aquarium. 1 Gallon + 7 Gallons = 8 Gallons.