The solubility of CuCl2 in water is 75,7 g/100 mL at 25 0C.
Approximately 36 grams of ammonium chloride will dissolve in 100 grams of water at 50°C.
Approximately 30.4 grams of potassium chloride would dissolve in 100 cm3 of water at room temperature.
When sodium chloride is placed in water and shaken, it will dissolve into its ions of sodium (Na+) and chloride (Cl-). This forms a solution of sodium chloride in water, where the Na+ and Cl- ions are dispersed throughout the water.
Copper hydroxide is classified as a slightly soluble. Exactly how much will dissolve depends on the pH of the water, and other factors such as the carbonate concentration. Even with these taken into account, for pH around 7, and typical water hardness, the amount of copper hydroxide that will dissolve should be 10 mg or less per liter of water.
At 20 0C the solubility of sodium chloride in water is approx. 360 g/L.
At 60°C, the solubility of sodium chloride is approximately 39 g/100 ml of water, while the solubility of sodium chloride is about 36 g/100 ml of water. Therefore, at this temperature, around 3 g more sodium chloride will dissolve in 100 ml of water compared to sodium chloride.
Not much. The Copper (II) sulfate will just dissolve in the water (at about 316g/L of water). Copper (II) sulfate is pretty friendly around water and not all that dangerous. It's used commercially.
First add water to mixture the ammonium chloride will dissolve in the water but the iodine does not. Filter out the iodine using filtration then use evaporation or distillation to obtain the ammonium chloride.
The amount of sodium chloride that would dissolve in 2 L of water at 20 degrees Celsius depends on if the water is moving. It would dissolve faster in moving water than still sitting water.
Amount of sodium chlorate that will dissolve in 100 mL of water at 60°C is higher compared to the amount of sodium chloride. Sodium chlorate is more soluble in water than sodium chloride at this temperature due to their different solubility characteristics.
The answer is 71,3 g, for sodium chloride.
Well, isn't that a lovely question! The amount of copper sulfate that water can dissolve depends on various factors like temperature and pressure. Generally, water can dissolve about 203 grams of copper sulfate per liter at room temperature. Just like painting, it's all about finding the right balance and letting things blend harmoniously.