Look for the meaning of one lay length of a mooring hawser
the lay ratio is the ratio between the lay length of the cabble and the Outer diameter af the cable( or the layer) lay ratio = lay length / OD and the lay ratio standard from ISO
Lay length is calculated by measuring the distance a rope or cable extends when laid out flat, typically from one end to the other. If you know the diameter of the coil or spool and the number of turns, you can use the formula: Lay Length = (Number of Turns x Diameter of Coil) / π. Alternatively, for ropes with a specific lay pattern, you may need to measure the angle of the lay and apply trigonometric principles.
Its shadow will be 50 millimeters in length, if you lay it down on a flat surface.
The ideal lay length for stranding conductors is typically calculated to ensure mechanical strength and flexibility of the cable while minimizing electromagnetic interference. This length is often determined based on the specific application and requirements of the cable, such as the operating voltage and current levels. A common lay length range for stranding conductors is between 6 to 30 times the cable diameter.
The length of pipe is required to be known to help procure the required quantity of pipe.
this how you can figure it out it lay it out and measure it with a tap measure the an see what it comes out to be
It depends on how many tiles of each length that you have.
The general consensus is that Games are the "healthiest" and "smartest" birds. However, their rate of lay is awful and their eggs are pitiful. I would suggest buying quality dual purpose birds, bred for rate/length of lay.
To count chain links accurately, lay the chain flat and use a ruler to measure the length of a certain number of links. Divide the total length by the length of one link to determine the total number of links in the chain.
This will depend on the length of any lay overs. With no layovers, approximately four hours of flying time.
Do what I do with my snakes - use a piece of string to get the approximate length from nose to tail - then lay the string on a ruler to get the measurement.