answersLogoWhite

0

What else can I help you with?

Related Questions

What is the first test to perform with a electric heating appliance?

what is the first test that should be made on a heating electric appliance


What type of electric range cord should I use for my new kitchen appliance?

For your new kitchen appliance, you should use a 4-prong electric range cord.


Why should you not plug on an electric appliance when your Hans are wet?

because it will electrocute you


Installing a 120volt appliance what breaker is needed at the electric box?

For a 120-volt appliance, a single-pole breaker with a rating suitable for the appliance's power requirements should be installed in the electric box. The amperage rating of the breaker should match the current draw of the appliance to ensure proper protection and operation. It is important to consult with a qualified electrician to determine the appropriate breaker size for your specific appliance.


What is the overpowering smell from new electical appliances like washers and vacuum cleaners?

The odour is mainly paint and insulation drying out from the warmth of the appliance when it is running for the first few times. Also, if the appliance includes an electric motor with brushes running over a commutator, there can sometimes be a distinctive "electric sparks" odour from the brushes and the commutator's contacts until the brushes have fully "bedded-in". Depending on the appliance, if the smell does not start to disappear after using the appliance regularly for say a week or a month then there may some faulty wiring or insulation that is smouldering inside and such a fault should be investigated by the supplier's warranty service engineer or a licensed electrician or - if the appliance is small enough - why not just take it back to the shop and ask them to advise you?


Who makes a good double range?

The GE Double Oven Electric Kitchen Range is a great appliance which should suit your needs.


What type of oven cord should I use for my new electric oven?

For your new electric oven, you should use a heavy-duty, three-pronged, 240-volt oven cord that is compatible with the electrical requirements of the appliance.


What type appliance must not be earthed?

Appliances with double-insulation do not require earthing as they have an additional layer of insulation for safety. It is important to follow manufacturer instructions and guidelines when determining if an appliance should be earthed.


An appliance does not work at all when plug it in and turn the switch what happen to the appliance circuit is?

There could be several reasons why the appliance does not work when plugged in and the switch is turned on. It is possible that there is a loose connection in the circuit, a blown fuse, a malfunctioning component, or a faulty switch. A qualified electrician should be consulted to properly diagnose and fix the issue.


What wire gauge should be used for an electric range?

For an electric range, a wire gauge of 8 AWG (American Wire Gauge) is typically recommended to handle the high power requirements of the appliance.


How can I test the high limit switch in my appliance?

To test the high limit switch in your appliance, you can use a multimeter to check for continuity. First, disconnect the power to the appliance. Then, locate the high limit switch and remove it from the appliance. Set your multimeter to the continuity setting and place the probes on the terminals of the switch. If the switch is working properly, the multimeter should show continuity. If there is no continuity, the switch may be faulty and need to be replaced.


What is a fair price for a used Kenmore electric range?

A fair price for a used Kenmore electric range would be between $150 to $500 depending on how old it is and the condition it is in. When selling any used appliance the best price should be 50 to 75 percent of what a new appliance cost's as long as the item is in good to excellent condition.