answersLogoWhite

0

What else can I help you with?

Related Questions

What is the least count of half meter rod?

The least count of a half meter rod is 0.5 cm. This means that the rod can be measured in increments of 0.5 cm, allowing for precise measurements.


What measurement can go into a meter rod 100 times?

There are 100 centimeters in a meter.


What is the least count of meter rod in meter?

The least count of a meter rod is typically 1 millimeter (mm), which is equivalent to 0.001 meters. This means the smallest measurement that can be accurately read using a standard meter rod is 0.001 meters. However, some meter rods may have finer divisions, allowing for more precise measurements.


How many 3 meter lengths of rod is there in 7800 FEET?

792.5 three-meter lengths.


What difficulties will you face by using a meter rod to measure the internal diameter and internal depth of a breaker?

A meter rod may not fit cross-wise inside a breaker (whatever that is).


What is the weight of 1 tmt rod?

the weight should be change by the diameter of the rod.one rod length is thirteen meter and it should be measured in meter only. The formulae to find the weight of rod is d square /162 and you wil get unit weight then multiply it in length then u got a weight of the rod.


How long is one meter rod?

One meter long. One meter is equal to 39.37 inches, just a little over a yard.


Weight of 8 dia steel rod per meter?

.4017


If a meter rod is divided into 10 equal parts what would it be?

centimeter


Why couldn't a meter stick be used to measure the expansion of the rod?

Probably because the meter stick is not accurate enough to measure the small amount of expansion of the rod. You need something smaller and more accurate.


What is weight of a MS rod whose dimensions are 10 mm diameter and 1 meter length?

10mm ms rod for waight


How can one determine the linear charge density of a rod?

To determine the linear charge density of a rod, divide the total charge on the rod by the length of the rod. Linear charge density is measured in coulombs per meter.