The engine light code P0037 indicates a problem with the heated oxygen sensor (HO2S) circuit, specifically related to the bank 1 sensor 2, which is located after the catalytic converter. This code typically signifies that the sensor is experiencing a low voltage condition, potentially due to a faulty sensor, wiring issues, or poor connections. If left unaddressed, it can lead to decreased fuel efficiency and increased emissions. Diagnosing and repairing the underlying issue is essential for optimal engine performance.
Code PO1298 is a diagnostic trouble code (DTC) that typically indicates an issue with the engine's air-fuel mixture, specifically pointing to a lean condition. This means that the engine is receiving too much air or not enough fuel, which can lead to performance issues, increased emissions, and potential engine damage if not addressed. Common causes include vacuum leaks, faulty fuel injectors, or issues with the mass air flow sensor. It's essential to diagnose and address the underlying problem to restore proper engine function.
I would tell you the code but I dont know the code.
The problem is that it is manly used for Pokemon Diamond
82FBD860AE242721 313D2BCE9004E149 D521BFDAF306CE43 this is code for gibl
To steal Pokemon, you have to have a cheat code and cheat engine/emulator you can play a Pokemon game on. Hope I helped! :)
code quelle pays 0037
If the check engine light is still on there is still a problem. When you fix the problem the light will go out by its self and the fault code will stay in the ecm as a stored code until it's reset.
If the light comes on there is a code. Have the code checked and fix the cause. If the light is on with no codes, then you have a computer problem.
yes it can. if the check engine light shuts off by itself then chances are either the trouble code is a soft code. A hard code will keep the check engine light on until the problem is fixed and the check engine light is reset.
If the check engine light is on, use a code scanner to find out why.
Scan tool, will give you a trouble code as to why the computer turned the check engine light on.
If you are referring to the Check Engine light, then it means that the computer has detected a problem with the emissions system. Have the computer scanned to get the code. This code will lead you in the direction of the problem.
The check engine light is on because there is a problem with the system. Until the problem is corrected the light will remain on even if you reset it. Most code readers can reset the light but you will need to fix the problem first. Have your local auto parts store read the code(s) set to help you determine what is wrong.
If the check engine light is coming on it is because you have a problem with the emissions system. Have the ECU scanned to retrieve the code that has been set. This code will tell you what part is being effected and may help you diagnose the problem.
The Check Engine Light comes on when the ECU has detected a problem with the emissions system. Have the ECU scanned with an OBD2 scanner to retrieve the code that has been set. That code will tell you where to start looking for the problem.
If you have repaired the problem that caused the Check Engine light to come on, then you need an OBD2 scan tool to reset the light and clear the fault code from the ECU. If you have not repaired the problem then it will just come back on.
Trouble code P0101 means:Mass or volume circuit range performance problem