Yes, CLR (Calcium, Lime, and Rust remover) can be used to clean house windows, particularly to remove mineral deposits and hard water stains. However, it's essential to dilute it according to the manufacturer's instructions and avoid prolonged contact with glass and frames, as it can damage some surfaces. Always test a small area first and use protective gear, including gloves and goggles, to ensure safety.
use CLR or anything with oxi clean, kaboom works pretty well.
yes..but you would have to completely clean the entire unit after you are done and flush it out completely then replace the swamp cooler pads with new ones as CLR is very bad for your health. Using scrub brush is better but harder work.
Cleaning soap scum off of a glass shower door can proove to be very difficult. This is due to the fact that soap scum can easily build up and become very resilent to removal. The best product to clean this soap scum is the product CLR.
Try removing and cleaning out the aerator on the sink faucet, and the shower head. (Word to the wise: if you take them apart, write down the order. It can be tricky trying to figure it out, afterwards). By just removing them, you should get hot water, thereby verifying that these are the cause of the problem. If you don't want to clean them, you can always replace them. Water saving aerators are available for faucets. Water saving shower heads are also available. Some shower heads even have on and off switches, for additional water savings. How I learned, the hard way: My situation was, hot water from kitchen & bathroom sink faucets, and even from the tub faucet, but not from the shower head. So, I removed the shower head and soaked overnight in CLR.* Cautionary note: Probably would have been OK to soak overnight in vinegar, or for a few hours in CLR. But overnight was too long in CLR. It must have dissolved more than just the calcium deposits. Now the shower head has much thicker and much more water consuming streams. (Previously it had a very stingy water conserving spray).
The best soap scum remover often depends on personal preference and the specific surfaces being cleaned. Popular options include commercial products like Zep Shower, Tub and Tile Cleaner or CLR Bath & Kitchen Cleaner, which are effective at dissolving soap scum. For a more natural approach, a mixture of vinegar and baking soda can work well, as the acidity of vinegar helps break down the buildup. Always test any cleaner on a small area first to ensure compatibility with your surfaces.
You can clean calcium buildup on windows by mixing equal parts water and white vinegar in a spray bottle. Spray the solution on the affected areas, let it sit for a few minutes, and then scrub with a sponge or cloth. Rinse with plain water and dry with a clean towel to leave your windows sparkling clean.
Yes, CLR (Calcium, Lime, and Rust remover) can be used to clean water coolers, particularly to remove mineral deposits and buildup. However, it's essential to thoroughly rinse the cooler with water afterward to ensure no CLR residue remains, as it is a strong chemical. Always check the manufacturer's guidelines before using CLR on any appliance to avoid potential damage.
YES! CLR can clean anything, darling. I promise, you will NOT be disappointed. But on the commercial, the shower drain thing, not true. It doesn't happen just like that.
CLR Win stands for Common Language Runtime and Win would stand for Windows, as in Microsoft Windows
As many as required by the programs that require a specific version, up the maximum of 4 different version. DotNet v1.0 programs require CLR v1.0. DotNet v1.1 requires CLR v1.1. DotNet 2.0, 3.0 and 3.5 require CLR v2.0 and DotNet v4.0 and 4.5 require CLR v4.0.
CLR (Calcium, Lime, Rust) cleaner has a distinctive smell similar to vinegar due to its acidic composition. Some people find the smell strong and unpleasant, while others may not mind it. It is always best to use CLR in a well-ventilated area to minimize exposure to the smell.
It's not recommended to use CLR in a dishwasher as it can leave behind chemical residues that may be harmful if ingested. It's better to use dishwasher-specific cleaners or vinegar for cleaning and descaling your dishwasher.
You can, but an oil based cleaner would be better. I use WD40.
This is not a recommended use for CLR. People have done this and report no adverse result's, but I would not.
soak it in CLR for awhile, then use an old toothbrush to scrub off the lime you can get CLR at any grocery store, in the laundry soap aisle
It won't do you any good. If the blockage is undersink, remove the P-trap and clean it out. If further down pipe,then snake it from there while P-trap is off.
clr is whats it called or maybe mr clean has a product