Some chemical compounds can have more than one crystal form. Calcite and Aragonite would be such an example.
In addition, there can be substitution of one element by another of similar charge and mass. In a specimen of heulandite I have, some of the original calcium has been replaced by barium, and eventually by strontium, to the extent of about 10%.
The mica group would be a good example of various forms of very similar minerals.
To some extent it depends upon how strictly one conforms to the definition of a mineral with 'a fixed chemical composition'.
Additionally, the effect of including trace contaminants is well illustrated in the various silicate crystal gems.
Metal in its natural state is a mineral occurring in the form of ore. It then needs to be mined, extracted from the ore and processed to make whatever. So a metal object is man made from a naturally occurring material. Unless of course it was made by a woman.
It's an ore that doesn't contain a very high proportion of valuable minerals. The term could also be applied to richer ores containing large amounts of undesirable impurities, arsenic for example. Low-grade ores are less valuable than higher-grade ones. Also, recovery rates for low grade ores tend to be lower than for high grade ores - that is, a lower percentage of the total amount of metal in the ore is extracted successfully. The definition of low-grade depends on the resource in question. For copper, low grade ores have less than 1% copper. For gold, an ore having 1% gold by mass would be considered (very) high-grade, as gold is more valuable than copper.
I don;t know so some one who does take this out and put the real answer
mineral water contains salts. Distilled water does not contain any salts, it's just water. And bottled water comes in a bottle. As a "food" item I expect it has to pass food safety standards, but otherwise it could be anything. Mineral water is water that has had minerals dissolved into it as a result of being stored underground. Spring water is mineral water for example. Depending on where the mineral water has come from effects the mineral content of the water. Distilled water on the other hand has been distilled. That mean it has been turned into steam, then the steam is allowed to cool turning it back into water in a clean container. What happens as a result is that only the water turns into steam leaving the mineral content behind giving you pure water with no mineral content.
A physical change means that only the appearance of the substance has changed. So if your tear up a piece of paper, its still paper so a physical change has taken place. If you heat or freeze water its only a change of state so its still a physical change. So long as the molecular or chemical structure of the atom/substance does not change it will always be a chemical change. H20 will always be H20.
A mineral deposit can become an ore when it becomes profitably extractable. Nevertheless, factors affecting prices include supply versus demand, production costs, stocks on hand, government (price controls), possibility of supply disruption, technology (substitution, recycling), geopolitics, and exchange rate.
The mineral is found as part of the natural rock and is an ore, as in copper ore, iron ore, and so on.
Not necessarily. An ore is a mineral deposit that contains some resource that can be extracted profitably. So while ores are minerals, most minerals are not ores.
It is so because metals cannot be extracted from minerals in a convenient way. E.g.:- Aluminum metal is found in both minerals: clay and bauxite. Aluminum metal is extracted only from bauxite in a convenient way. So, bauxite is an ore of aluminum. On the other hand, it is not extracted from clay so clay remains only as mineral not ore of aluminum.
You might mean ore, and an ore is just any unrefined mineral that usually contains metal. So gold can be a part of ore, but ore does not necessarily have to contain gold.
A mineral containing a useful substance is an ore. Example: Bauxite is an ore, from which is extracted the commercially valuable metal aluminum.
Diamond is an allotrope of the element carbon, so may be classified as a mineral (it can be colored by elemental impurities). About 20% of all diamonds mined are gem-quality stones, leaving the remainder to be classified as industrial diamonds. Diamond is not an ore.
Concentration of ore Unwanted rocks, sand and grit from the mineral ore are called gangue or matrix. These have to be removed so that the mineral ore is concentrated with higher percentage of metal. Ores are mined from deep within the earth's crust in the form of rocks. The minerals are embedded in these rocks. The rocks are first crushed into smaller pieces by crushers. Then they are ground to powder by ball mill and other processes so that powdered ore is obtained. Depending on the type of ore, hydraulic washing, froth floatation process, magnetic separation and chemical separation techniques are applied for concentrating an ore.
It depends the chemical and physical properties of the raw materials. Beneficiation Equipment can be divided into Flotation Machine, High-frequency Screen, Hydrocyclone, Magnetic Separation Machine, Spiral Classifier. Flotation machine are mainly used in mineral ore dressing plants, selecting the valuable mine from gangue. It is applicable for the separation of numerous of mineral ores, such as fluorite and talc, gold ore, copper ore, iron ore and zinc ore and so on. High-frequency screen is a good choice for screening and grading the fine particles of mineral ores. This machine has wide application in iron ore, tin ore, tungsten ore, tantalum ore, dolomite sand and some other kinds of mining dressing plants' screening and grading work. Hydrocyclone has wide application in metal ore and nonmetal ore processing plants, such as plants of iron ore dressing industry, manganese ore beneficiation industry, coal industry, environmental power, alumina industry and some other mining industries. Magnetic separator is mainly used in wet separating of the fine minerals with strong ferromagnetism. The wet-type drum permanent magnetic separator is mainly suitable for wet separating of the following ores with the sizes less than 3mm, which are magnetite, magnetic pyrite, baking ore, and limonite and so on.
Concentrating an ore involves separating the valuable minerals from the waste materials in order to increase the concentration of the desired element or metal. This process typically involves crushing and grinding the ore, followed by physical and/or chemical methods such as gravity separation, froth flotation, or magnetic separation to achieve a higher grade of the desired mineral.
The mineral hematite is an important source of iron ore. It is commonly used in the production of steel and as a pigment in paints. So, if you're into building stuff or making your walls pretty, hematite is your go-to mineral.
Some chemical compounds can have more than one crystal form. Calcite and Aragonite would be such an example. In addition, there can be substitution of one element by another of similar charge and mass. In a specimen of heulandite I have, some of the original calcium has been replaced by barium, and eventually by strontium, to the extent of about 10%. The mica group would be a good example of various forms of very similar minerals. To some extent it depends upon how strictly one conforms to the definition of a mineral with 'a fixed chemical composition'. Additionally, the effect of including trace contaminants is well illustrated in the various silicate crystal gems.