0
What else can I help you with?
How much sand do you need for 135sq meters?
You need 1.35 cubic meters for each centimeter deep.
How many grains of sand in a 12' x 12 x 2 area. 12 feet long x 12 inches deep x 2 inches thick.?
it depends on the grades of sand and how big each pebble is that makes sand.
Need to know type of sand?
There are a lot more types than you'd think! The white sand of tropical and subtropical settings are comprised of limestone and may have coral and shell fragments. The gypsum sand dunes of the White Sands National Monument are famous for their bright white colour.Arkose is a sandstone with lots of feldspar in it and granite rock outcrop.Some sands have chlorite, glauconite, gypsum or magnetite.Some sands come from volcanic basalts and obsidian.Many sands have iron impurities within the quartz crystals of the sand, making them appear a deep yellow colour.Some sand deposits have garnet (a type of gem) including other small gemstones.Bet you didn't know sand was so glamorous!
What would happen if you stirred water and sand?
If you stirred water and sand together, you would have a mixture of water and sand until the sand sinks to the bottom.
How much sand to cover 15000 square feet 2 inches deep?
If your land is a perfect square at 208.71 feet wide by 208.71 feet long, you will need 121.000 tons of sand. This will give you a depth of .5 inch.
If the sand pit for the long jump is 4.5m times 4m and there is 6m cubed of sand how deep is the sand?
It is about 0.33 m deep.
72 square feet of sand is how many lbs of sand?
That depends on how deep the sand is.
Can you fill in the deep part of a pool with packed sand covered by a 4inch layer of cement to make it only 5 feet deep?
sand gets the pool dirty and the sand wiil just dissolve
Can some plants grow better in sand then just sunlight?
no because the sand doesn't keep it in the sand so it goes deep
What is the sandiest place in the world?
the sierra dessert has the most sand in fact there is 1 km deep of sand
How many square inches does a 60 lb bag of sand cover?
The answer will depend on how deep a layer of sand.
How much sand is needed for an area 10 foot x 10 foot?
An area 10 foot x 10 foot is 100 square feet. 100 cubic feet of sand would cover it with a one foot deep layer of sand. If the sand needs to be 6 inches deep, then 50 cubic feet are be needed, or 25 cubic feet if the sand is to be 3 inches thick.
Where in the world can a sand dollar be found?
In deep water in the ocean
What is another name for a wet deep sand deposit?
dirt
How many square yards in one ton of sand?
That depends entirely on what kind of sand how deep you spread it. As an approximation, you could assume a bulk density for dry sand of about 110 lb/ft3. One ton (2000 lb) of sand would thus be about 18.18 ft3 or 0.673 yd3. If you spread it 6 inches deep you could cover about 4 square yards. At a foot deep, you would cover 2 square yards. At 3 inches deep you would cover 8 square yards. At 1 inch deep you would cover 24 square yards Reported bulk densities for sand range from 78 lb/ft3 for molding sand to 130 lb/ft3 for moist sand.
How deep should the sand be in a horse arena when you do Jumping?
Not to deep so your horse doesnt fall through so round about 2 inches deep
How much sand for a horse arena?
4 inches deep would be the minium coverage of sand needed for a horse area
