Rent a floor sander from Home Depot and remove it all very quickly.
-Be sure to wear mask and goggles, it makes a lot of dust you don't want to inhale
Rub it with a rough rag dipped in Goof Off, it will soon soften enough to peel it off.
you cant
Warm water and a little scrubbing can remove white glue or school glue.
Goof Off will remove almost any glue, including super glue types from laminate and hardwood flooring. Just rub with a rag and a few drops of Goof Off and the glue soon softens and can be peeled off. This has not harmed 3 different types of flooring that I've tested it on.
try lighter fluid and a terry cloth. it worked for me. obviously be careful, have good ventilation, and wear good knee pads. -AZ_ivan
Rub it with a rough rag dipped in Goof Off, it will soon soften enough to peel it off.
If the wooden floor is going directly onto terrazo there is no way to nail it.
you cant
The most effective method for removing floor glue using a floor glue remover is to apply the remover according to the manufacturer's instructions, allow it to penetrate the glue, and then use a scraper or putty knife to gently lift and remove the softened glue from the floor surface.
The most effective method for removing floor tile glue is to apply a floor tile glue remover according to the product instructions, allow it to penetrate the glue, and then use a scraper or putty knife to gently lift and remove the softened glue from the surface.
To effectively remove glue down carpet from your floor, you can start by using a heat gun or a steamer to soften the adhesive. Then, carefully peel back the carpet and use a scraper to remove any remaining glue residue. Finally, clean the floor with a solvent or adhesive remover to ensure a smooth surface.
To effectively remove glue from floor tiles, you can use a commercial adhesive remover or a mixture of warm water and vinegar. Apply the solution to the glue, let it sit for a few minutes, then scrub with a brush or scraper. Repeat as needed until the glue is fully removed.
A coir mat typically has more friction than a wooden floor because of its coarse texture and ability to grip onto shoes or feet. The friction generated by the coir mat can help prevent slipping and provide better traction compared to a smooth wooden floor.
dampen a rag with lighter fluid or mineral spirits. no you wont remove the polyurethane, its dry. but it will however remove the glue with no problem or blemishes in your poly.
Use petrol or paint tinner...
To effectively remove glue from a floor, you can use a solvent like acetone or a commercial adhesive remover. Apply the solvent to the glue, let it sit for a few minutes, then scrape off the softened glue with a putty knife or scraper. Repeat as needed until the glue is completely removed. Be sure to ventilate the area and wear gloves to protect your skin.
To effectively remove glue from a vinyl floor, you can try using a mixture of warm water and dish soap to soften the glue. Gently scrape the softened glue with a plastic scraper or putty knife. You can also use a commercial adhesive remover or rubbing alcohol for tougher glue stains. Be sure to test any cleaning solution in a small, inconspicuous area first to ensure it does not damage the vinyl floor.