1 ATM = 101325 Pascals
1 Pascal = 1/101325 ATM
Multiply psi x 0.07 to get atmospheres.
0.975 ATM = 98 791.88 Pa = 98.791 88 kPa
some units of pressure include: ATM (atmospheres) psi (pounds force per square inch)
what units are commonly used to measure airpressure how does increasing the density of gas affect its pressure how does increasing the density of gas affect its pressure what units are commonly used to measure air pressure
The lb (Pound) is a unit of mass (sometimes called weight) and the psi (pounds per square inch) is a unit of pressure. I take it that you need to calculate the pressure of a number of pounds on a certain surface. You may find the suggested web site helpful. You can't convert pounds to pounds per square inch (psi). One is force and one is pressure. If you know the area over which the force is spread, then you can divide the force by the area and get pounds per square inch (psi).
Multiply psi x 0.07 to get atmospheres.
1psi = 0.068 atm. So to convert 30 psi using dimensional analysis... 30 psi x 0.068 atm/1 psi = 2.04 atm
add atmosperic pressure to gage pressure to convert to psia one atm standard = 14.7 psi
To convert gauge pressure to absolute pressure, you need to add the atmospheric pressure. Since the atmospheric pressure at sea level is 1 atm, the internal pressure in this case would be 2.7 atm (25 psi gauge pressure = 1.7 atm + 1 atm atmospheric pressure).
To convert psi (pounds per square inch) to atm (atmospheres), you can use the conversion factor of 1 atm = 14.6959 psi. So, you would divide the psi value by 14.6959 to get the equivalent value in atmospheres.
ATM, psi, mm hg ATM is the scientific one. 1 ATM = 760 mm hg
To convert a pressure value from pascal to psi, you can use the conversion factor of 1 pascal is equal to 0.00014503773773 psi. Simply multiply the pressure value in pascal by this conversion factor to get the equivalent value in psi.
To convert the differential pressure of 43 psi to absolute pressure, you would add the atmospheric pressure to the differential pressure. On average, atmospheric pressure at sea level is about 14.7 psi. So, adding 43 psi to 14.7 psi gives an absolute pressure of approximately 57.7 psi.
To convert PN25 to PSI, you can use the conversion factor where 1 PN (Pressure Nominal) is equivalent to approximately 145 PSI. Therefore, to convert PN25 to PSI, multiply 25 by 145. This results in approximately 3625 PSI.
4.5 ATM (760 mmHg/1 ATM) = 3,420 mmHg
1.41 psi is equivalent to approximately 0.097 atm.
1 psi = 0.068947572932 bar http://online.unitconverterpro.com/unit-conversion/convert-alpha/pressure.html Eric Serdahl