answersLogoWhite

0

A wheel requires a smaller amount of force to be moved than an axle. Combined, a minimal amount of force is used to move the wheel and in turn is transferred from the wheel to the attached axle, to move the axle. Alone the axle would require a greater amount of force for it to be turned.

User Avatar

Wiki User

11y ago

What else can I help you with?

Continue Learning about General Science

What is the AMA formula of a wheel and axle?

whereR = resistance forceEactual = actual effort force, the force required to turn the wheel.


Why is it important that the diameter of the wheel be greater than the diameter of the axle in a wheel and axle?

because the wheel turns through a much greater distance than the axle.but the smaller turn of the axle is more powerful.witten by-brenda v.=========================Answer #2:-- The fact that the wheel turns through a greater distance that the axle doesis a result, not a cause, of the wheel being bigger than the axle.-- The axle is not more powerful than the wheel. Ignoring losses, they must bothhave the same power. The axle's force is greater than the wheel's force, but to payfor it, the axle must turn through greater distance. Same as all the lever stuff.-- The diameter of the wheel needs to be greater than the diameter of the axleonly if you'd prefer not to have the axle scrape on the ground.


Is a crank a wheel and axle?

Yes It is. The wheel is where you hold and the axle is the part where it is conected to the object.


What type of simple machine is a car jack?

Wheel and axle could be the type of simple machines because it has a wheel for it could advance to the front and to the back, and what the axle do is that is making the wheel move and its at the bottom of the toy car or any car


What is the mechanicatage advantage of a wheel and axle when the wheel has a diameter of 15 inchesand the axle has a diameter of 3 inches?

the mechanical advantage is noting

Related Questions

Does a wheel and axle change the direction of the effort force?

Yes, a wheel and axle allows for a change in direction of the effort force. By applying the effort force tangentially to the wheel, it can rotate around the axle, allowing the direction of the force to be redirected as needed.


Does the size of force change in a wheel and axle?

haters


Does a wheel and axle change the direction of applied force?

Yes, a wheel and axle changes the direction of the applied force. When force is applied to the wheel, it causes the axle to rotate in a different direction, which can be used to transfer motion and perform work, such as in vehicles or machines.


What type of simple machine can NOT change the direction of a force?

wheel and axle


When does a wheel and axle a force multiply?

A wheel and axle system multiplies force when the input force is applied to the wheel and the output force is exerted on the axle. The larger radius of the wheel compared to the axle allows for a mechanical advantage, resulting in the amplification of force.


How do you find the output force of a wheel and axle if you already know the input force?

To find the output force of a wheel and axle, you can use the formula: Output Force = Input Force * (Radius of Wheel / Radius of Axle). The output force is determined by the ratio of the radii of the wheel and axle, with the input force determining the overall scaling factor.


How does the mechanical advantage of a wheel and axle change the size of the wheel increases?

As the size of the wheel increases the necessary force needed to pull the wheel decreases


What type of a lever is a wheel and axle?

A wheel and axle is considered a type of compound lever, where the wheel acts as the axle's fulcrum. When a force is applied to the wheel, it creates a mechanical advantage by allowing the axle to rotate, thereby multiplying the force applied.


What is used with a pulley to Chang the direction of a force called?

A pulley system combined with a wheel and axle is used to change the direction of a force. The wheel and axle provide a mechanical advantage by allowing a force to be transferred in a different direction while also multiplying the force applied.


What is the input force and output force of a wheel and axle?

Input force is the force you put in to a machine. Output force is a force exerted by a machine. You exert input force on the wheel and when the axle rotates it exert large output force.


How can wheel and axle be used to gain force?

NO


In a wheel and axle what usually exerts the resistance force?

wheel