asdsfsdafdsadsf
By BTS, do you mean Base Transceiver Station? Such equipment can be found in cell phone towers. Usually a BTS runs on 48V DC.
Up to hundreds (Wikipedia). There are technical limits, but the GSM standard doesn't say something about a maximum.
Well in the film biz it means behind the scenes.
In manet node Mobility is slow. In Manet no Fixed Infrastructure . In Vanet Node Mobility Very high. In Vanet have Fixed Infrastructure . Ex . BTS
how follicular study can done
shal i get any book the same Every Commissioning has its way and steps. We use software for commissioning the BTS. Every Software tool has some steps. By following that steps, we can do commissioning
There are huge types of BTSs. From 2G to 4G,various products using various methods. Commissioning is a procedure that add/modify different settings of BTS to provide access to its users. its done by Using PC with Access software's. either serial port or Ethernet port of PC used to gain access. But in BTS side it can be different type of connector. Procedure is different with each product.
A Base Transceiver Station (BTS) Engineer serves an important part in the cellular network communication field. The BTS engineer handles cell site installation, development, and commissioning of the Mobile Station (MS) network.
Drive Test in BTS (BASE TRANSCEIVER STATION) is used to find out the signal strength or RX level of the signal. It is done by the mobile having TEMS software.
3g BTS is greater than 2g bts. and it is with new technologies.
Pre-commissioning is the testing of non-energized systems. Commissioning is the testing of energized systems.
Indoor BTS: It is placed in a shelter Air-condition is must Very sensitive Outdoor BTS: No shelter required Air-condition is not a must Not very sensitive comparing to indoor bts
GSM900 transmitted power from BTS: 39dBm GSM1800 transmitted power from BTS: 36dBm
commissioning...its inspecting a piece of equipment or plant to make sure you got what you paid for...i.e. the vendor build the correct thing...part of it is making sure it is safe to start up. This can be done by comparing the as built to the drawings.
typically 2km
Pre-commissioning and commissioning are words used in the engineering field. Pre-commissioning begins many months before the start of the project. During this phase duties are assigned.
Commissioning typically refers to the process of verifying and ensuring that a system or equipment is installed correctly and operates as intended. Pre-commissioning usually involves initial testing and checks before the formal commissioning process to make sure that everything is ready for full commissioning. Pre-commissioning is a preparatory phase before commissioning.