The cubic yards require that the width of the pile also be given.
Assume the width of the pile of dirt, w , is 80 feet.
V = ( L ) ( w ) ( h )
V = ( 300 ft ) ( 80 ft ) ( 10 ft ) = 240 x 10^3 cu ft
V = ( 240 x 10^3 cu ft ) ( 1 cu yd / 27 cu ft )
V = 8889 cu yd <------------------
When a person speaks of a 'yard' of dirt, sand, cement or similar material, they actually mean a 'cubic yard'. A yard is a measurement of length. A cubic yard is a measurement of volume.60 (cubic) yards of dirt is the equivalent of 1,620 cubic feet of dirt.One cubic yard is measured as an amount that is 3 feet wide x 3 feet long x 3 feet high, or 27 cubic feet.60 cubic yards equals 27 cubic feet x 60, which equals 1,620 cubic feet.If you spread 60 cubic yards of dirt one foot thick you'd have an area of 1,620 square feet.If you spread this dirt 6 inches thick you'd have an area of 3,240 square feet.
Contractors and construction people often speak of "yards" of concrete, topsoil, or fill. They are in fact speakeing of "cubic yards" which is the common unit of measure when reffering to these items, they simply abbreviate and everybody they generally interface with understands that the quantity refferred to is cubic or a volume.For instance a concrete sidewalk 4 inches thick, 4 feet wide, and 120 feet long requires 1/3 foot X 4 feet X 120 feet or 160 cubic feet of concrete. There are 27 (3 X 3 X 3) cubic feet in a cubic yard. Then the sidewalk would require 160 ft3 divided by 27 ft3/yd3 or 6 cubic yards. The contractor would call the Ready Mix plant and say, "I need 6 yards of concrete at this address at this time" and 6 cubic yards would be delivered as requested.Additionally, Earth Moving equipment capacities are measured in cubic yards. It's not unusual to hear a contractor say, "Yah, we had to move 3,000,000 yards of fill to build that runway", or some other project.It's not proper terminology, but it is communicating, and that is the desired outcome. A yard is a measure of distance; a cubic foot is a measure of volume. They aren't compatible. There are 27 cubic feet in a cubic yard.
American football is played on a field 360 feet long by 160 feet, which is an area of 57,600 sq ft Multiply by 20 for a volume of 1,152,000 cubic feet, or 42,667 cubic yards This includes the sidelines. Soccer field is different.
Assuming the figure is a perfect rectangle: There are three feet in one yard. Therefore, the long sides would be 210 / 3 = 70 yards long, and the shorter sides would be 180 / 3 = 60 yards long. Therefore, the perimeter would be (70 + 60) x 2 = 260 yards.
One acre is 43,560 square feet or 4840 square yards. The conversion would be 2.89 acres.
None. It's a hole. 162 cubic feet of air. There is no dirt in a hole.
None because it's a hole but 6 cubic yards of dirt will fill it up.
The volume of the hole is 2 yards * 3 yards * 1 yard = 6 cubic yards. To convert this to cubic feet, we multiply by 27 (since 1 cubic yard = 27 cubic feet). Therefore, the volume of the hole in cubic feet is 6 cubic yards * 27 cubic feet = 162 cubic feet of dirt.
When a person speaks of a 'yard' of dirt, sand, cement or similar material, they actually mean a 'cubic yard'. A yard is a measurement of length. A cubic yard is a measurement of volume.60 (cubic) yards of dirt is the equivalent of 1,620 cubic feet of dirt.One cubic yard is measured as an amount that is 3 feet wide x 3 feet long x 3 feet high, or 27 cubic feet.60 cubic yards equals 27 cubic feet x 60, which equals 1,620 cubic feet.If you spread 60 cubic yards of dirt one foot thick you'd have an area of 1,620 square feet.If you spread this dirt 6 inches thick you'd have an area of 3,240 square feet.
1 cubic yard = 27 cubic feet12 x 12 x 2 = 288 cubic feet = 102/3 cubic yards
It doesn't hold any dirt. It's a hole.
39,600 cubic feet. 1,466 cubic yards or about 122 truckloads if it were non-compacted fill.
If you were looking for the dimensions of the hole as of a rectangular prism, it would be 3 * 2 * 2 = 12 yards cubed (324 ft cubed).But, there is no dirt in the hole, just the 12 yards cubed that came out of it.
This question cannot be answered. An area is "square", a volume is "cubic". The question asks about the volume of an area... and is meaningless. A square yard contains 9 square feet An area 30 feet by 50 feet contains 1,500 square feet or 166.67 square yards
If you have to dig a hole 270 feet wide by 470 feet long to a depth of 15 feet, you've got a lot of digging to do. The volume is a simple product, so 270 x 470 x 15 = 1,903,500 cubic feet. Since there are 27 cubic feet to the cubic yard, you've got 70,500 cubic yards of dirt to move! If your trucks carry 12 yards, that's 5,875 loads. That's a lotta fill!,
To calculate the volume of a hole that is 6 feet long, 6 feet wide, and 6 feet deep, you multiply the dimensions: 6 ft x 6 ft x 6 ft = 216 cubic feet. Since there are 27 cubic feet in a cubic yard, you divide 216 by 27, resulting in 8 cubic yards of dirt needed to fill the hole.
110 cubic yards (rounded)