0
When a person speaks of a 'yard' of dirt, sand, cement or similar material, they actually mean a 'cubic yard'. A yard is a measurement of length. A cubic yard is a measurement of volume.
60 (cubic) yards of dirt is the equivalent of 1,620 cubic feet of dirt.
One cubic yard is measured as an amount that is 3 feet wide x 3 feet long x 3 feet high, or 27 cubic feet.
60 cubic yards equals 27 cubic feet x 60, which equals 1,620 cubic feet.
If you spread 60 cubic yards of dirt one foot thick you'd have an area of 1,620 square feet.
If you spread this dirt 6 inches thick you'd have an area of 3,240 square feet.
What else can I help you with?
How many yards is 60 meters?
60 meters = 65.6 yards
How many yards are in a tandam dump truck?
Provided it's not a short tandem, 15 yards with a 'rock tub' dump body and 16 yards with a 'dirt tub' dump body are typical.
If you dig a one acre pond 20 ft deep how many yards of dirt will you get?
32,266 CY
Is 2 yards bigger than 60 inches?
Two yards is larger. A yard is 36 inches, while two yards are 72 inches. 72 is larger than 68, so two yards are larger. To make comparisons, it is always best to convert both numbers to the same units, and usually the smaller unit.
What is the perimeter of 210 feet long and 180 feet wide in yards?
Assuming the figure is a perfect rectangle: There are three feet in one yard. Therefore, the long sides would be 210 / 3 = 70 yards long, and the shorter sides would be 180 / 3 = 60 yards long. Therefore, the perimeter would be (70 + 60) x 2 = 260 yards.
How much is 200 yards x 60?
12000 yards
20 yards is how much in feet?
There are 3 feet in one yard, so there are 60 feet is 20 yards.
How much in tons does 2.5 yards of dirt weigh?
The weight of dirt can vary depending on the type of dirt, but on average, 1 cubic yard of dirt weighs about 2,000 pounds. Therefore, 2.5 yards of dirt would weigh approximately 5,000 pounds or 2.5 tons.
How much is 60 in ft?
60 inches is 5 feet. 5 feet can be rewritten in yards as 1 and 2/3 yards.
How many yards is 60 meters?
60 meters = 65.6 yards
How many metres in 60 yards?
60 meters = 65.62 yards.
How yards in 60 meters?
In 60 yards, there is 65.616798 yards, so approximately 66 yards.
If you figured an area is 600 cubic yards how many yards of dirt do you need to fill that area?
To calculate the volume of dirt needed to fill the area, you would need to know the depth of the area in yards. If the depth is 3 yards, then you would need 1800 yards of dirt (600 cubic yards ÷ 3 yards). If the depth is 1 yard, then you would need 600 yards of dirt.
How much yards of sand covers a 60 feet by 40 feet area?
yards is a unit of length, not of area.
60 yards in meters?
60 yards = about 54.86 meters.
How many yards in a 60 by 50 square?
300 yards if the dimensions are also yards
How much dirt is required to cover 1 acre 6 inches deep?
806.66 Cubic Yards
