Tubs come in a variety of sizes so the amount would vary too.
That depends on the size of bathtub you have.
Litres. Think about the size of a 2 litre container of milk. You would fill a few of them from the bath tub. A millilitre is 0.001 of a litre, much smaller
Remove cat feces by turning the hot water on and let it run until it is hot. Then, plug the tub and fill it with hot water to the level of the stain. Put 1/2 cup of dishwasher detergent (not dishwashing liquid) in the hot water and mix it around. Let it soak overnight. It may need a light scrubbing when you drain the tub. A piece of 600 grit wet/dry aluminum oxide sand paper can also be used to wet sand the area. When the tub is clean, coat it with Rain-X windshield glass protectant. It may take a few applications since fiberglass tubs are porous. This will help the tub stay clean.
The difference between a shower and a tub is the shower tends to enclosed with water that comes out of a shower head above while a tub has a faucet that pours into a large basin.
The volume of an irregular object can most accurately be determined by its displacement in water. Fill a container to the brim, and stand it in a tub of some description. When you submerge the irregular object, the quantity of water displaced (ie. overflowing into the tub) will be equal to the volume of the object. The accuracy of this method will be determined by your ability to measure the quantity of water and the purity of it (pure H20 being ideal). This was first discovered by Archimedes, who used the displacement of water to ensure the kings crown was solid gold.
That could heavily depend on the total capacity of the tub, and on how full you fill it.
The number of buckets needed to fill a tub depends on the size of both the tub and the buckets. For example, if a standard bathtub holds about 40 gallons of water and a typical bucket holds 5 gallons, you would need approximately 8 buckets to fill the tub. However, this can vary based on the specific dimensions of the tub and bucket used.
Five.
It depends on the size of the tub.
Fill a gallon bucket, timing how long it takes to do so. Then fill your hot tub using the same source... example: if you filled the bucket with a hose, then fill the tub using the same hose. Then time how long it takes to fill the tub and divide the time it takes to fill the tub by the time it takes to fill the bucket and then you know how many gallons it is.
Water can come from the tap or it can come from the drain -- one or the other.Assuming that you didn't turn on the water to fill the tub, perhaps the sewer system drains are backed up.
If your tub and toilet fill up with black water when you do your laundry, you have a blockage in your sewer pipe. Someone needs to remove the blockage.
To determine if your tub is leaking from the overflow drain, fill the tub with water and observe if the water level rises above the overflow drain. If water is leaking from the overflow drain while the tub is filled, then it is likely that the tub is leaking from the overflow drain.
Depends how big your hot tub is. Mine is about 150 gallons or 1,200 pints.
The number of mints required to fill up a 5-gallon tub depends on the size of the mints. Assuming the mints are small, you would need thousands of mints to fill a 5-gallon tub.
It really depends on the size of the bath tub. Yours and mine may differ by a lot.
That depends a great deal on the type and size of tub as well as on how deep you fill it. Most people are not going to fill the tub up as much for small children as they will for an adult and a really big and fat person cannot put as much water into the tub as a short, skinny person (unless they want the tub to overflow). Typical bathtubs used in the USA can hold 40 to 60 gallons of water - but if you fill them to the top you will overflow the water when you get in.