Terminal ballistics is an entire field that covers this question. Guns can range anywhere from 850 to over 5 million PSI in force.
14.69 pounds per square inch (psi). 2,115.36 pounds per square foot. 19,038.24 pounds per square yard. 58,972,852,224 pounds per square mile. If you want to calculate the complete gravitational force of Earth, find the area (in square miles) and multiply it by 58,972,852,224. That will give you, in pounds, the complete gravitational force of Earth.
You are asking for square footage, but you are giving enough information for a measure of volume in cubic inches. Given a regular rectangular shape, 48 inches by 42 inches would give you 2016 square inches. Multiplying this by 38 inches would give you 76,608 cubic inches.
You multiply the length times the width to get area. This would be 84 square feet.
You mean pressure. That is never per inch or per cm. It needs to be square inches or square centimeters. 1 pound per square inch is 6894.757 newtons per square meter. Pound per inch is a measure of fabric strength. Normally any fabric when subjected to a strength test, a specific widteh is taken (normally 2") the fabric of t" width would give way at a particular load and this is expressed as fabric strength. SInce fabrics are soft and compressible, their trhickness measurement is dicey. and length measurement has no controversy about it. Unlike metals, where strength is measured as lb/square inch, fabri strength is always expressed per unit length.
Multiply the two dimensions to get the area. The calculation will give you 2.25 square feet per tile for a total of 1,305 square feet.
Because they are known. That brings a lot of popularity, but also a lot of hate. Also if they are powerful the could feel a lot of pressure and simply just give up.
around 50 ton jack
Well, if you can imagaine that weight of 1,600 elephants on every square cm of your body. That's the pressure on your body.
yessir
In a mighty and powerful kingdom, there was a big, old man...
That is 400 megapascals. A megapascal is a unit of pressure representing one million pascals. A pascal is the equivalent of one newton of force applied to one square meter of area (which is a fairly small amount of pressure). To give a relative basis, 1 atmosphere of pressure (sea level pressure) is equal to 14.7 pounds per square inch (PSI). This is equal to 101.325 kPa = 101,325 Pa. So, 400 MPa would be approximately equal to 4000 atmospheres of pressure.
Physical size of a tank is irrelevant to it's pressure rating.
14.69 pounds per square inch (psi). 2,115.36 pounds per square foot. 19,038.24 pounds per square yard. 58,972,852,224 pounds per square mile. If you want to calculate the complete gravitational force of Earth, find the area (in square miles) and multiply it by 58,972,852,224. That will give you, in pounds, the complete gravitational force of Earth.
You give it a teddy bear
A rhombus as it is a lopsided square
I presume you mean at a depth of 180 feet. Since the weight of a cubic foot of water is approximately 65 pounds, the weight of water on a square foot at that depth is 65 times 180, which is 11,700 pounds. That is the pressure per square foot. Since there are 12 x 12 or 144 square inches in a square foot, the pressure in pounds per square inch would be 11,700 divided by 144, or about 81. This is in addition to the barometric pressure, which is about 14 pounds per square inch, for a total of 95 psi.Answer 1It's not possible for a water tank to be 180 feet. One of its dimensions could be, however.Sadly, since we don't know which dimension it is, nor do we know the height ofthe tank or the depth of the water in it, nor do we know at what level or in whichdirection you want the pressure measured, there's no way at all to even begin towork on a solution to this question.
in times square. in times square.